Electronics Forum | Mon Oct 08 03:42:31 EDT 2001 | Darby
Can't get on to the Heller email or website and I require an urgent answer. Has any one had any experience in reversing the conveyor direction and thus all the zone set ups etc in a Heller 1500w or similar. What did it cost and were you happy with th
Electronics Forum | Tue Oct 09 20:30:25 EDT 2001 | djarvis
Thank you all for your input. We didn't get the oven and if we did I decided in the short term to just turn it around and run it as a belt mesh oven - the next line we buy runs it's conveyor to suit the oven. Hi to you Marc, it's been a few years. Yo
Electronics Forum | Fri Jul 26 09:34:10 EDT 2019 | spoiltforchoice
I've mostly been looking at the smallest oven in the range of the bigger ovens as it were. So that's the 1707 from Heller and similar sized units from elsewhere. However apparently Heller are apparently bring back the 1500 series in the form of a 150
Electronics Forum | Wed Aug 13 09:11:19 EDT 2008 | rgduval
Shane, We're assuming that the software is similar to our Heller 1800. We're also assuming that the oven has thermocouple ports, and that you have the thermocouples to plug into them. From the screen that displays the zone data, there should be a
Electronics Forum | Tue Feb 12 10:51:46 EST 2002 | stefwitt
Dave is right. There is no machine on the market which can handle a 1.5 m long "board". If you or someone else will have to tinker with a custom made machine, it will be less expensive to use a used machine ( I could be offering some used Siemens mac
Electronics Forum | Wed Mar 28 11:05:33 EDT 2018 | dleeper
I had a DOS Heller 1500 a looooong time ago so my memory is fuzzy. That being said I remember there were some weird options in some of the configuration menus. I don't remember the names, but its were you would set the alarm points, you could manual
Electronics Forum | Thu Sep 13 15:09:07 EDT 2018 | reckless
So it took me a few months to figure out the compact reflow oven market. I bought the following ovens: Heller 1500EXL Essemtec RO300FC-C - QTY 2 DDM Novastar Gold Flow - Desktop DDM Novastar 1800HT - Conveyor Zevatech 5 zone oven T962C benchtop ove
Electronics Forum | Wed Sep 08 14:31:48 EDT 1999 | John Thorup
| | Hello: | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting into the oven.
Electronics Forum | Sun Feb 27 17:06:18 EST 2005 | Darby
This is the profile we came up with on a 1500 to satisfy the parameters suggested by Indium. This was on an FR4 1mm thick 4 layer pcb that I would descrbe as medium density, QFP, SOP, AL-CAP, TANTS, D-PAK, MINI SPRING COIL, SOT and CHIPS were all use
Electronics Forum | Wed Sep 08 21:32:46 EDT 1999 | Jason Nipper
| | | | | | Hello: | | | | | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting
