Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Sun Jul 25 00:59:47 EDT 2010 | smellew
llew@SurfaceMountEngineering.com Sales@SurfaceMountEngineering.com Web: http://www.SurfaceMountEngineering.com
Electronics Forum | Wed Mar 31 00:40:22 EST 2004 | darburch
We have recently acquired a dynapace shuttlegate. Yes we bought used and it did not come with a manual. If anybody could let me know where I could get even parts of the manual(functionality, parts list) I would greatly appreciate it, Dynapace wants $
Electronics Forum | Mon Jul 13 20:24:10 EDT 2020 | emanuel
Can't find the correct part number for the conveyor belt of a DEK Europa. It is round and green, perhaps antistatic type. I found the part number of the same for 265GSX, it is 122022 G4957. Any idea if the Europa uses the same belt size as the 265GSX
Electronics Forum | Fri Apr 03 11:19:33 EDT 2015 | davef
You might find your equipment want here: http://www.smtnet.com/parts/
Electronics Forum | Mon Mar 20 11:08:17 EST 2006 | Chunks
Spare parts? Like what? If it's your belt motor, try cleaning out the gear box attached to it. 99% of the time it's the lube in this gear box that dries out and turns to glue.
Electronics Forum | Mon Jan 15 15:42:45 EST 2007 | realchunks
Dback is right. You're missing part of your manual. Once you perform steps 5-7 you should get an indication that you calibrated correctly. Man, it's a cardinal sin to recal conveyors once you have programs adjusted. Why did you feel the need to
Electronics Forum | Mon Mar 20 06:21:42 EST 2006 | AR
Have a problem with Omniflo 5 (-97 vintage) pin chain conveyor. Occasionally the conveyor stops for a second or two, then makes a slight jerk, then stops again, makes a jerk etc. Then suddenly the problem goes away only to return next day (we switch
Electronics Forum | Tue Jan 05 21:01:40 EST 2021 | brianjones
We are looking at setting up a memory module conveyor belt with a stacker and de-stacker. I will need to handle DDR3 and DDR4 Long DIMM and SODIMM. I will be mounting an image camera under and over the modules. Looks like an edge conveyor would be be
Electronics Forum | Fri Jul 23 09:31:52 EDT 2004 | cyber_wolf
Make sure that your mesh conveyor drive chain is not jumping a sprocket tooth. This will cause the conveyor to "pop" and you will have skewed parts. I seriously doubt that it is your profile causing skew. It is more than likely something mechanical.
.gif)
