Electronics Forum | Wed May 12 07:34:42 EDT 2004 | RLeonard
The standard machine is set from the factory at 7-9 degrees, 7 is the most standard, why are you considering the change? before doing any thing to the machine, first identify why? what type of defects are you seeing? I have found, depending on the t
Electronics Forum | Tue Nov 30 08:01:28 EST 2010 | edmaya33
Conveyor Technologies may be the solution.We've been using this for 10 years and come up with the various sizes and configuration that suits your needs. Being a less maintenace is an added factor.
Electronics Forum | Fri Dec 07 13:38:06 EST 2007 | ehess
Does anyone kbnow where I can find replacement belts for the old PCT (Process control Technologies) conveyors?
Electronics Forum | Fri Aug 25 08:12:16 EDT 2006 | davef
Leading conveyor manufacturers are ATI, Conveyor Technology, Crown Simplimatic, Dynapace, Flextek, Fuji, Jot, Kanetic, Panasonic, and Process Control.
Electronics Forum | Thu Sep 11 19:19:07 EDT 2008 | Mike Konrad
Most ionic contamination testers prompt the operator for the current concentration at the start of each cycle. The normal concentration is 25% DI Water and 75% IPA. Although most machines ask for the current concentration, concentration adjustments
Electronics Forum | Thu May 20 12:05:12 EDT 2004 | Rob
I got one sitting in my room that is not being used. It meets SMEMA standards and is from Conveyor Technologies Model# REF-CC-1M-1-BR. If you are interested, I can put you in contact with someone who can talk with you...
Electronics Forum | Fri Jun 27 12:03:00 EDT 2003 | haviland
Hi David--Call Terry Jeglum @ Electronic Technologies, (630) 584-2050. He is up to speed on all the conveyor guys alive and dead. He also has some used units available. Nick Haviland.
Electronics Forum | Thu Jun 08 21:56:41 EDT 2000 | Thomas Ravener
There are many available: Simplimatic Process Control Technology (PCT) JOT PMJ Bosch Dynapace Nutek Applied Conveyor Engineering (ACE) A wholly owned division of Universal Instruments and made for UIC integration of their products. This is just but
Electronics Forum | Mon Dec 12 22:14:42 EST 2005 | davef
�a va Frank? Well, popularity depends on the beholder. Never heard of your "Specnor" machine. US and Eurolanders take different approaches to conveying boards. * US: Finger conveyors * Eurolanders: Pallet conveyors Suppliers of wave solder machin
Electronics Forum | Wed Dec 05 23:34:32 EST 2012 | aqueous
Typical conveyor speeds on leaded alloys and OA flux is 2 FPM. Typical conveyor speeds on lead-free alloys and OS flux is 0.5 FPM. Temperature should be 140 F. Most polypropylene inlines cleaners should not exceed 140 F. -Mike Konrad Aqueous Technol
