Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Fri Oct 24 13:41:39 EDT 2003 | albertoh
I need some information about coplanarity specs for QFP's. I try to setup coplanarity inspection on my QP242 but i'm not sure about what value i need on each parameter in order to setup my diferents parts data for this option. Thanks in advance.
Electronics Forum | Wed Mar 15 09:01:11 EST 2006 | Vick
The lead was inspected for coplanarity and it's within the specification it's designed for and doesn't show any variation in terms of height as compared to it's adjacent lead that has good wetting
Electronics Forum | Fri Jul 22 07:37:32 EDT 2005 | David Robbie
Hi, I am an engineer based in Scotland, but have some IC's sitting with a company in the Boston area, that need checked for coplanarity. Does anybody know of a company/ lab with a lead inspection machine that they could be sent to? Regards, Dave.
Electronics Forum | Wed Feb 27 16:48:12 EST 2002 | retronix
We can fully inspect your parts and give you the actual measurements of coplanarity, this will let you know if they are within spec. Regards Matt
Electronics Forum | Fri Oct 01 17:59:13 EDT 2010 | rway
Your real problem is further upstream. The limitations of your AOI aside, first find out why your leads are being lifted. Is it through handling or are they from the reel that way? To address your AOI question, Hegemon is correct, coplanarity inspe
Electronics Forum | Fri Oct 23 00:15:50 EDT 2009 | tony_d
Hello Nagesh, Do yourself a favor, check out MIRTEC's MV-7 system. I purchased one of these machines with the Intelli-Scan laser option. This is a secondary laser inspection system that allows you to test for coplanarity of leaded and non-leaded de
Electronics Forum | Mon May 14 22:53:12 EDT 2007 | davef
What is it about your incoming inspection procedures that allow these components to your assembly area?
Electronics Forum | Wed Oct 27 07:38:08 EDT 1999 | Mario
Hi Jerry, I have a solution for you which I have done myself and shown to others which should cost you less than 100$ if you already have a microscope.This is still an operator job and an automated operation. You need two mirror squares (about 4inc
Electronics Forum | Fri Oct 06 12:58:07 EDT 2006 | cw
hi All, Anyone use snap on type EMI sheilding before? I would like to provide a DFM to a customer who currently have a EMI shield soldered on the boards, which i found this not quite manufacturing friendly as it block the view for inspection, plus re
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
.gif)
winsouce.jpg)