Electronics Forum | Fri Oct 06 12:58:07 EDT 2006 | cw
hi All, Anyone use snap on type EMI sheilding before? I would like to provide a DFM to a customer who currently have a EMI shield soldered on the boards, which i found this not quite manufacturing friendly as it block the view for inspection, plus re
Electronics Forum | Thu Feb 15 07:47:12 EST 2007 | zanolli
1" long SMT components to be placed without coplanarity issues> Also, what types of finishes are common for the flex;i.e, ENIG, immersion Ag, etc.?
Electronics Forum | Tue Jun 26 12:24:24 EDT 2001 | nifhail
Thanx for the reply Dave. We actually had a few thermocouples attached from underneath to see if there is any delta in temperature within the same BGA's ball. They looks OK, with the slope of 1 -2 Deg C,soak at 120 Deg C - 150 Deg C at about 90 sec,
Electronics Forum | Mon Sep 25 16:14:16 EDT 2000 | LarryK
What do you all do to fix coplanarity on fine pitch QFPs? I know that the best thing would be to send them back to the vender, but what about the when you gotta use them? Straightening by hand seems to be so time comsuming. Any better ways? Larry
Electronics Forum | Fri May 01 08:15:36 EDT 2009 | davef
Scavenging Methods [Improve Solder Scavenging of Large Area-array Sites, SMT, Laurence Harvilchuck, process research engineer, Unovis Solutions, harvilch@unovis-solutions.com] Two common methods exist for scavenging residual solder on the site for s
Electronics Forum | Fri Jun 09 12:13:11 EDT 2006 | Chunks
Rob and Pete are both right. "We" had the same problem, with just one manufacturer of the same style QFP (don't want to name names here). We had the same style of QFP from a different manufacture right next to the problematic one on about 3 product
Electronics Forum | Fri Oct 01 17:59:13 EDT 2010 | rway
Your real problem is further upstream. The limitations of your AOI aside, first find out why your leads are being lifted. Is it through handling or are they from the reel that way? To address your AOI question, Hegemon is correct, coplanarity inspe
Electronics Forum | Fri May 28 07:37:52 EDT 1999 | Steve Cheung
Yes l know this problem keeps cropping up on the forum but l've missed some of the follow-ups. Our problem is that the lifting only occurs on 3% of production so actually detecting an improvement is difficult. We're actually having to inspect 144 p
Electronics Forum | Thu Sep 07 08:44:17 EDT 2006 | vicknesh28
Did check the coplanarity of the failed lead and found it to be as good as the wetting leads.
Electronics Forum | Wed Aug 07 18:32:22 EDT 2019 | orbitcoms
How would I measure/observe coplanarity issues ?
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
