Electronics Forum | Fri Apr 16 11:03:35 EDT 2004 | davef
Your copper corrosion is not good. It indicates that you have not done a good job in cleaning. [We assume this is a medium green color, not unlike the color of the solder mask on your board, that is almost like a translucent lacquer; rather than th
Electronics Forum | Wed Feb 26 04:28:39 EST 2014 | chongns
Hi All member I have a problem on the stable down the color of the white solder mask PCB. first, i tough the color differences was cause by the solder mask ink, but after a close look, the color change are cause by the copper under the solder mask
Electronics Forum | Fri May 13 14:08:39 EDT 2011 | eezday
This appears to be black-pad and is often the result of using specs that call for gold plating that is too thick. The black pad is corrosion that is created between the gold and electroless nickel during the gold plating process. This is counter in
Electronics Forum | Mon Dec 30 12:48:18 EST 2019 | rgduval
Keep in mind that the oven temperature does not, necessarily, equate to the board temperature. The thermal characteristics of the parts and copper will cause the board temperature to be different, sometimes significantly, than the oven temperature.
Electronics Forum | Fri Sep 19 15:52:18 EDT 2008 | davef
This is not something that we'd expect to see on NiPdAu finished leads. Help us understand the extent of the problem better. From your picture, it looks like a band of copper color with black on the outer portions of the copper color that bleeds int
Electronics Forum | Wed Feb 11 17:04:47 EST 2015 | davef
A-610E, 10.7.4 covers solder mask discoloration. Use that for your disposition In a previous thread, Boardhouse told us "Here are a couple of things that can affect color. * Material color is the major, * Matte green from Enthone would be different
Electronics Forum | Wed Jan 14 18:23:05 EST 2009 | boardhouse
konrad, Here are a couple of things that can affect color. 1) Material color is the major, 2) Matte green from Enthone would be different in shad than Matte green from Taiyo. 3) Solder mask is two parts, One the green mask, two the hardner, having t
Electronics Forum | Wed Jul 31 09:20:47 EDT 2002 | larryk
Dave, I'm assuming your unsoldered fids are exposed copper. Do you have any issues with machine vision due to the various color changes the copper goes through as it oxidies? Larry
Electronics Forum | Mon Oct 02 14:59:42 EDT 2023 | joeljacobo
Thank you!
Electronics Forum | Mon Oct 02 15:01:14 EDT 2023 | joeljacobo
Thank you Dave, I will check it out
