Electronics Forum | Mon Nov 15 21:35:50 EST 1999 | Dave F
Bob Bob: Fortunately, you found this before you built-up a lot of product. Some thoughs and other drivel: 1 Use IPC-TM-650, Method 2.4.8 for copper peel with a Instron machine. Typical pad peel strength requirement for FR-4, 2 oz. copper is: 6 l
Electronics Forum | Thu Mar 04 17:10:19 EST 1999 | Earl Moon
| Our vendor proposed to supply us with shields made out of Cold Rolled Steel (CRS) electroplated with Sn (50 - 150 minches). Should I be concerned with solderability or are there a better alternatives to tin finish? | No matter the base metal, elec
Electronics Forum | Tue Jun 22 17:14:41 EDT 1999 | Dennis Fall
I am looking to apply 10-15�m of a conductive material that will withstand 280�C. Our product consists of an alumina substrate sputtered with NiCr (2000�) and Copper (2000�) and 15-60 �m of electroplated copper (all metals patterned on the substrae)
Electronics Forum | Wed Jun 23 10:21:25 EDT 1999 | Chrys Shea
| I am looking to apply 10-15�m of a conductive material that will withstand 280�C. Our product consists of an alumina substrate sputtered with NiCr (2000�) and Copper (2000�) and 15-60 �m of electroplated copper (all metals patterned on the substra
Electronics Forum | Wed Apr 21 17:11:05 EDT 1999 | Earl Moon
| Does anyone have any experience with soldering 50mil pitch BGA's that have a via in the pad, the size is .012 The via will be masked off on the bottom side of the board. Need to know what precautions or problems if any I might encounter. The proces
Electronics Forum | Wed Apr 21 19:09:10 EDT 1999 | Earl Moon
| | Does anyone have any experience with soldering 50mil pitch BGA's that have a via in the pad, the size is .012 The via will be masked off on the bottom side of the board. Need to know what precautions or problems if any I might encounter. The proc
Electronics Forum | Wed Jun 10 18:40:00 EDT 1998 | Earl Moon
| I am looking for the Industry standards on vias. Are they required to be plated with solder or is copper plating enough? What about reliabilty with either one? Also, if tenting the via is required should it be copper plated or solder plated over
Electronics Forum | Tue Jun 07 21:50:46 EDT 2005 | davef
Most component fabricators don't properly understand the impact of soldering with pure tin solderability protection on components. Here's one that does: "The Effects of Board Attachment Processing on Sn Whisker Formation on Electroplated Matte-Sn on
Electronics Forum | Thu Jun 24 10:48:02 EDT 1999 | Earl Moon
| Recently, there has been an upsurge in the Pin Hole/Blow Hole problem in our wave soldering process. We are baking the PCBs for 2 Hrs. at 125 degree C. The Wave Soldering profile seems to be O.K. Still the problem is persistent. Can somebody hel
Electronics Forum | Tue May 30 21:09:30 EDT 2000 | Dave F
Dennis: Direct metalization is more of an European phenomena than a US one. Not to say that good things don�t come out of Europe. As background: Direct Metallization. In circuit board fabrication, an alternative to electroless plating makes the
winsouce.jpg)