Electronics Forum | Wed Jun 16 22:33:52 EDT 2004 | Honorio Crespo
I will like to compare my average component placement per hour on a Fuji CP-6 versus other companies using the same machine. Can you share with me your average? Thanks, Honorio
Electronics Forum | Tue Jul 17 15:26:08 EDT 2012 | kruzer
Hi I use CP4, CP6, CP643, GLV and NXT, but i have a problem with CPIV, i cant use It with Director Fuji Flexa. i use snifer rs232 (rs232mon) to resolve problem and what i know: Computer send on rs232 to machine (every 1 min or something): vQN2105
Electronics Forum | Thu Sep 06 12:12:06 EDT 2007 | mnorthey
We had a simliar problem with our MCS30, we ended up replacing the MCS30 with FLEXA from Fuji. the program was expensive but we used an off the shelf computer, (cheap). We are running 6 CP3's with the one computer at about ten times the speed. Very u
Electronics Forum | Mon Oct 29 15:57:44 EDT 2012 | ngotranbestek
Hi Michel CP642 ont interface with RS-232. All machine CP6 or IP3,..will connect to DigiBox ( RS232 Port)and connnect to Computer have Sofware Flexa.
Electronics Forum | Wed Jun 04 22:52:32 EDT 2003 | hwatali
Now we are in urgent to buy 1.FUJI CP6-4000 or CP6-5000 for 3 sets;2.FUJI CP643E for 2 sets;3.CP6 8��2 and CP6 8��4 paper feeder. If you can supply these to me,pls contact me asap.
Electronics Forum | Mon May 14 14:24:28 EDT 2012 | smellew
30x30 is ok for CP65 not CP6
Electronics Forum | Tue Mar 07 10:43:27 EST 2006 | dougs
The E has a different x-y table setup, i seem to remember the CP6 having rollers and cams to control the z table height, the CP6E has a belt driven z axis. Also i think the CP6E is slightly faster, 44K cph against 40K, still just program it as a CP6
Electronics Forum | Wed Jul 21 10:38:10 EDT 2021 | bukas
I got Samsung CP45FV NEO with Cognex 1063200006110P single board computer. This machine had about 10 data corruption problems in past two years on both classic ATA and industrial ATA SSDs. I suspect there may be something wrong with Cognex card and t
Electronics Forum | Sun Jan 20 14:04:49 EST 2002 | cstech
We have a CP6 5000, please kindly inform us the optimal tact time is 0.09 or 0.12. Kindly confirm us the CP65 is same or different to CP6-5000. The CP6-4000 and CP6-500, any different, except on the table size? Hope to recieve your help?!
Electronics Forum | Fri Nov 10 10:28:36 EST 2000 | Mike McMonagle
Happy Friday To All! Now that the social niceties are out of the way, here�s the problem: We have received a CAD file for a product we are going to build with a .pcb filename extension, that our FujiCam software can�t translate. The computer that or
