Electronics Forum | Fri Nov 22 14:35:56 EST 2024 | carl_p
Depends on your software level or age. There is a software option to just change this on the newer stuff. Do you have any older cyber optics kit - you can use the older cal kits for other cyber machines - if you have them of course.
Electronics Forum | Mon Nov 25 13:30:21 EST 2024 | carl_p
Do you have the manual & wiring info? I remember having to put jumpers in or something similar to get it to work with G/NG stackers in the past? could need something similar if its an older machine. Cyber will normally help on something like this a
Electronics Forum | Sun Nov 24 01:49:19 EST 2024 | poly
I originally assumed the rail calibration required a cal kit but you can use any board. So I can calibrate when I have it set to right to left and everything works correctly. If I change it to left to right by running the settings program, then atte
Electronics Forum | Tue Oct 01 11:48:01 EDT 2013 | bengt
Hi All. We have bought EKRA E4 screenprinter. We are running R to L and printer has L to R direction. Does anyone can help me on this ? On specs it says all kind of directions.
Electronics Forum | Sun Oct 06 12:18:03 EDT 2013 | christian01976
Hello! Go on the Service Button (bottom right) password could be 2211 or 9060. In that menu you should be able to change direction. Please tell me if it works! Bye Christian
Electronics Forum | Thu Jan 23 15:57:58 EST 2014 | bestglobalsmt
Hello! > > Go on the Service Button (bottom right) > password could be 2211 or 9060. In that menu you > should be able to change direction. > > Please > tell me if it works! > > Bye > > Christian christian - do you have any idea where the op
Electronics Forum | Fri Jan 24 06:36:42 EST 2014 | cbeneat
For operator, try 4530. To change the password, I think it's done in the password INI file.
Electronics Forum | Tue Jun 11 13:25:22 EDT 2019 | romford_navy
Anyone know how to change direction of placement conveyor on CP45FVNEO? Changed direction in factory mode but no change? Input & Output ok Changed on conveyor pack board
Electronics Forum | Fri Jun 21 02:20:51 EDT 2019 | bukas
you will need to move board sensors too.
Electronics Forum | Thu Jun 20 16:56:26 EDT 2019 | kahrpr
It been a long time. You need special conversion cables, the board stop has to be changed and you have to swap a bunch of connectors on a card.
winsouce.jpg)
.gif)
