Electronics Forum | Tue Jan 24 08:01:32 EST 2012 | wolverine
When using the rectangular plate given with the machine that is used with calibrating the movable camera, does the longer side of the plate get fed into the machine ( rails set to 80mm ) or the shorter side ( rails set to 74mm ) Thanks Dave
Electronics Forum | Sun Jan 29 12:55:38 EST 2012 | tech_fun
i don't thing that it is a rule. the only ideea is to mov the camera exactly above the hole in the middle.
Electronics Forum | Tue Jun 18 16:03:34 EDT 2013 | cano1912
Looking for a Quad aligner part # 10-22603 for a CP-40LV pick and place machine. Used, refurbished, reconditioned. If anyone has info let me know.
Electronics Forum | Tue Oct 22 19:59:21 EDT 2013 | larrygroves
move the aligner. they are pinned and will likely work without calibration. Yes I sell parts and service. give me a call I have an e copy of the service manual
Electronics Forum | Thu Oct 17 18:35:29 EDT 2013 | nikyta
Hi Larry, I have a machine where one head has a faulty Z servomotor, and another head has a defective aligner. In the meantime that I procure the required spare parts, what part is easier to swap in order to have at least one head productive? Eve
Electronics Forum | Tue Feb 12 16:24:21 EST 2013 | larrygroves
Dave, It depends on what you mean by swapping heads. If you want to move the aligners its not too hard. If you want to move the entire head assy it will require a lot of calibration. Anything can be done but it really about the cost and the value
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
| 1 |
