Electronics Forum | Fri Mar 14 16:13:06 EDT 2008 | keithej2
Has anyone ever heard of 0201 components being placed by Fuji CP43 machines? Engineering wants to do an experiment here to see if it's practical.
Electronics Forum | Tue Mar 17 16:56:45 EDT 2009 | gregf912
Sorry Keith but is not possible to place 0201 parts on the CP43 machine. THe XY table is not tight enough on the resolution or the Z height. The parts camera will not be able to tell the part from the nozzle. THe CP6-4000 machine can not do 0201 part
Electronics Forum | Mon Mar 17 08:29:34 EDT 2008 | mulder0990
I couldn't see that it would be pratical at all. The older CP-6 machines need a camera upgrade to even place view the parts and you need a pristine CP6 feeder to run the part. If you do plan on trying, I wish you the best of luck.
Electronics Forum | Tue Mar 18 07:00:28 EDT 2008 | cyber_wolf
I would say that if your machine is low hours and "tight" it should be mechanically capable. The vision will be the problem. Good Luck.
Electronics Forum | Tue Mar 17 17:07:07 EDT 2009 | keithej2
Engineering tried it with special made .4 nozzles (which we could never get to pass a center test reliably) but the results were less than spectacular. The reject and bad placement rates were high so that idea was abandoned.
Electronics Forum | Mon Mar 17 13:34:05 EDT 2008 | cyber_wolf
I have never heard of this being done. The limitation is the camera. Also, I am not aware of anyone making CP4 nozzles for 0201's. If you want a Fuji that will do 0201's get a CP642 and upgrade the camera, or buy a CP643.(643's are set up for 0201's
Electronics Forum | Mon Mar 17 20:50:34 EDT 2008 | keithej2
SMT Research has offered to sell us 0.4mm nozzles for tests. Even if the camera worked with the nozzles and parts (which I doubt) I don't think the CP4 has the x-y accuracy to place 0201s well. We'll see, they are ordering the nozzles, test parts and
Electronics Forum | Wed Jun 27 08:47:02 EDT 2018 | Dex
What would you recommend? I am inquiring to see if this machine would include any of those 0402 or 0201 feeders. We have products that contain 0402s currently and it is a giant struggle with this CP43. We would like something that can place 0402 and
| 1 |
