Electronics Forum | Mon Mar 23 15:38:31 EST 1998 | bill yates
I will convert your cp6 paper[red]8x4 feeders to plastic[yellow] feeders.email for more details
Electronics Forum | Tue Aug 17 08:36:01 EDT 2004 | rlackey
CP6/7 feeders are mechanical indexing machines, and the springs, cams etc wear over time leading to misfeeds & increased attrition. You can just strip & repair but especially on the 8x2 feeders the pick up position is critical. John, I'd check with
Electronics Forum | Thu Aug 03 05:25:15 EDT 2006 | Rob
Hi AJ, Just had a look though our parent company's stock on components, and even the smallest of diodes & transistors (such as DFN1006-2 package - roughly 0402)come on 8x4 plastic. All of the 8x2 pitch tapes are paper (EIA: 01005, 0201, 0402; JIS: 0
Electronics Forum | Mon Jul 31 05:15:52 EDT 2006 | aj
Hi all, We are starting to see more and more 0402 components on BOMs of late. We have a small quantity of feeders at the moment which are 8x2 paper. Any 0402 components we have placed have been on these feeders. I noticed that you can get embosse
Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit
Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8
Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax
I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!
Electronics Forum | Mon Aug 16 09:45:03 EDT 2004 | John
I have a CP6 and two CP643's, and was wondering why you need to "calibrate" your CP6 feeders? We have had no problems with ours. John
Electronics Forum | Wed Mar 29 23:48:39 EST 2006 | ____
Look on the serial number on the body of the feeder. If it starts with "W" it is a CP6 feeder. If it starts with "K" it is for the CP7. It really doesn't matter for which machine, it all depends on the bucket style feeder. If the feeder is a bucket s
Electronics Forum | Fri Mar 31 21:44:47 EST 2006 | fastek
Correct....if the feeders you purchased have 7" pans then they will work fine on a CP-6 or CP-7. If the pans are 13" and they are truly CP-6 feeders, they won't work on a CP-7. If you need to change out your pans I can help. I have a bunch of 13"
