Electronics Forum | Wed Aug 21 21:00:59 EDT 2002 | chao liang
we will use melf nozzle , we want to know how to setting the part data (or other item in f4g ), so the machine (cp642) can identify it from the nomal 1.3nozzle . thanks
Electronics Forum | Thu Aug 22 20:34:19 EDT 2002 | chao liang
thank you , Mark thank you so much
Electronics Forum | Thu Aug 22 02:18:09 EDT 2002 | mjabure
Specify the nozzle size as 1.4 in both the nozzle allocation table and the PD, the nozzles will still pass center test as the size variation is still within tolerence.
Electronics Forum | Thu Aug 22 23:18:03 EDT 2002 | mjabure
you're welcome. if you have any other questions you can e-mail me, my address here is mjabure@smtnet.com. Used to be a machine instructor for fuji.
Electronics Forum | Tue Oct 09 23:37:31 EDT 2012 | mdang
How does CP642, CP642 talking to the flexa or MCS system? RS-232 or ethernet? Can they communicate using RS-232? Thanks, -Michael
Electronics Forum | Thu May 19 12:16:48 EDT 2005 | beto_30
In this plant we have some lines with this configuration: Dek infinity - CP642 - CP642 - FIP3 - GSM - Vitronics and our averrage in change over is 60 min. It is possible that we will have a new one smt line, with Dek - My15 - My15 - Vitronics.
Electronics Forum | Thu Aug 16 08:08:11 EDT 2001 | forrge
Looking for feedback from people that used the Fuji CP6 to place 0201 parts. Is the CP642 reliable? I have been told that the Fuji CP642 cannot reliably place the 0201's and the CP643 must be used.
Electronics Forum | Fri Jun 07 14:57:21 EDT 2019 | andrewpayonk
I never worked with F4G, just now getting our feet wet with Flexa. How is your CP642 holding up? We got our CP642 almost up and running
Electronics Forum | Wed Mar 08 00:52:47 EST 2006 | ____
Your thinking of the FCP6 vs. CP642. The table on the CP642 is different from the FCP6/FCP6E. The speed for the machines is still rated at 40k cph (0.09). The differences from the FCP6 and FCP6E is the Safety Circuits and a few other electrical dif
Electronics Forum | Wed Jun 24 10:26:52 EDT 2009 | cstech
I have a used CP642 ball screw - in good condition customerst@163.com
.gif)
