Electronics Forum | Thu Dec 27 17:13:02 EST 2007 | mee13
The CP643 has a 0201 camera and a dual board loading system
Electronics Forum | Wed Aug 04 18:34:34 EDT 2021 | Serge
Hello, We have a problem to start our CP643. When trying to start the machine, it returns "machine waiting for vision board" We already did exchange all the pc boards (Vision, computer, etc...) We also did exchange the camera and the machine still
Electronics Forum | Fri Feb 15 15:50:55 EST 2002 | Bruce
The CP-642 simply requires a camera upgrade for 0201 parts. This is the same camera as is used on the CP-643. You should then get identical results
Electronics Forum | Tue Feb 19 09:19:01 EST 2002 | Kent
We have been placing 0201 in our production using both CP642 and CP643 since last year. But it was necessary to upgraded a narrow view camera to recognize 0201 for CP642. Since then, the placement of 0201 is really reliable.
Electronics Forum | Thu May 26 06:04:49 EDT 2005 | johnw
Hi Guys I have had this fault and it was traced to the ccd power module on the camera Zsolt I think I know you drop me a mail Tatabanya
Electronics Forum | Fri Jul 27 03:57:55 EDT 2018 | robl
Just found my notebook from the late 90's, 643 confirmed 0201 from the factory, 642 needed the upgraded camera from the 643.
Electronics Forum | Mon Mar 17 13:34:05 EDT 2008 | cyber_wolf
I have never heard of this being done. The limitation is the camera. Also, I am not aware of anyone making CP4 nozzles for 0201's. If you want a Fuji that will do 0201's get a CP642 and upgrade the camera, or buy a CP643.(643's are set up for 0201's
Electronics Forum | Tue Jul 22 22:27:48 EDT 2008 | edmaya33
Our CP643E machine fails to recognise narrow view on its parts camera and confirmed that the VME48108 Picture processing board is the reason. The part number is AEEPN1603. Can anybody have the idea how much will it cost of i purchase a new one? How a
Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Thu Jun 10 16:23:11 EDT 2004 | davem
Hi Grant, In previous positions I've had experience with the Fuji CP43, CP6, CP642, CP643, CP65, IP3 & QP242. In operating, training and process engineering capacities. Presently, I'm working with 2 SMT lines (in a process engineering capacity) wit
