Electronics Forum | Thu Mar 09 00:45:57 EST 2006 | kent_peterson
Fastek will get it done with 2 machine and 2 shifts. 2 shifts would need to place 50,000cph. One CP643 with both device tables set could get it done. Having it panelized in 50's, you would need to print 50 panels a hour so get a auto cleaner on the p
Electronics Forum | Thu Mar 09 12:09:19 EST 2006 | fastek
I assumed a conservative 25,000 cph for each of the chipshooters...whether it's an MV2F, CP-6, CP-642 etc. You're not going to get 50,000 cph out of (1) CP-643. You might for short periods but not in the long run. It would be suicide to rely on one
Electronics Forum | Tue Mar 14 03:57:43 EST 2006 | Base
Hey Peter, Did some simple math... 800.000PCB's x 20cmp = 1.6million placements 8hrs/day * 22 days/month = 176 hrs You're looking at over 90kCph fulltime! I'd say go with an AX-5 as JAX suggested. Given the product you described you could reach s
Electronics Forum | Sun Apr 30 22:29:23 EDT 2000 | Jack
We use Fujicam for FUJI CP643 programming and optimizing in our plant. There are about 800 parts (80% chips and 20% lead components) being placeed by 2 CP643. When using Fujicam automaticly allocate feeders and optimize insert order, I got 29000 cph
Electronics Forum | Thu Oct 02 01:59:06 EDT 2008 | edmaya33
Obviously nobody can help you Jack. 1. its the camera for parts recognition ( enhanced CMOS ). 2. positioning system upgraded from ball screw to linear motor/gantry. before CPH=16500 new CPH=18000 using H12S
Electronics Forum | Wed Jan 09 11:14:39 EST 2002 | stefwitt
I wished, I would get a job like that. Malta is a nice spot! With 1500 Cph you can select any machine on the market, but here are some questions. If you use a glue machine you apparently deal with mixed technology boards. If your volume is that low,
Electronics Forum | Fri Jan 11 00:04:26 EST 2002 | caldon
For the placement CPH you are looking for Manncorp can provide the whole turn key line and support and service the turn key line. "One stop shopping". Conveyors to printers to Placement to AOI to cleaning on to production management software. Please
Electronics Forum | Wed May 03 16:11:07 EDT 2000 | JAX
Jack, No need to get frustrated. There is not an optimization software made that will end up with a program that runs faster than doing the same program manually. There are too many ways to speed up production for the software to consider. Even if it
Electronics Forum | Wed Jan 09 06:37:04 EST 2002 | renocassar
I was contacted in order to set up a factory in order to produce home and car alarms equipment. I wish to use a fully automatic SMT line. That is I want a pcb unloader, glue dispenser, conveyers, Pick and Place machine and unloader. The maximum board
Electronics Forum | Sun Aug 31 16:16:37 EDT 2014 | spoiltforchoice
Andres, I think if you were to understand the process a little better you would realise the many many problems you would encounter building even very simple things using your method. Even 30 minutes watching Youtube videos of current machines might h
