Electronics Forum | Fri Jan 17 11:21:01 EST 2003 | Brian W.
You can Cpk numbers for the DEK using the QcCalc software. Simply connect a computer to the RS232 port on the DEK and follow the instructions. The program can give you Cp, Cpk numbers for a number of parameters, including X alignment, Y alignement,
Electronics Forum | Thu Jan 16 13:51:00 EST 2003 | ricardof
Thank you Jon I'm very interested in finding some more info on what to get and measure on the Paste Printer and the Oven (DEKs and Vitronics)
Electronics Forum | Tue Sep 26 20:14:29 EDT 2000 | Dave F
I agree with Wolfgang that a check list, like he proposes, is very useful in evaluating your ability to assemble products. No sense designing a 16 inch board if the throat of your wave is 15 inches. Taking a different tact � what if you define your
Electronics Forum | Tue Sep 26 20:16:07 EDT 2000 | Dave F
I agree with Wolfgang that a check list, like he proposes, is very useful in evaluating your ability to assemble products. No sense designing a 16 inch board if the throat of your wave is 15 inches. Taking a different tact � what if you define your
Electronics Forum | Thu Jan 16 16:04:31 EST 2003 | MA/NY DDave
Hi Well I don't agree with Mr Fox. Cp and Cpk i.e Capabilitiy studies always yield good results and add vigor to the engineer and the process. You might want to hire a consultant or go to some classes to make sure you do this correctly for your si
Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef
Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0
Electronics Forum | Tue Apr 21 02:28:54 EDT 2015 | dinhhuunam
Juki GL-1.... Any thoughts? I'm New to the > industry and I'm trying to buy a new screen > printer. I have two in mind, DEK and Juki. Hi Sir, I'll advise you the SJ INNOTECH Vision Screen printer Best Solution & Service for You Model HP-520S Hi
Electronics Forum | Fri Jan 17 16:24:04 EST 2003 | MA/NY DDave
Hi I haven't seen the DEK software you describe in action or studied it, yet I will tell you to be careful of some of the software on the market even from good companies. Spend the time needed to understand how the software makes the calculations,
Electronics Forum | Wed Oct 28 01:17:57 EST 1998 | Earl Moon
| SMT-ers | | I notice that most suppliers provide data that is eye-catching but avoid providing data of significant technical relevance, such as Cp and Cpk. It would perhaps be a wise idea for standards to be formulated in this area. | For
Electronics Forum | Wed Sep 20 19:34:13 EDT 2000 | Dave F
Congrats. You now control the source of almost 70% of the defects of your SMT operation. There is a neat series of presentations on printing, each year at SMI. One of the best of the SMI series was in 1997, because presenters used a common board
