Electronics Forum | Tue Jul 17 19:35:38 EDT 2001 | Anonymous
John, You realize the DT-651 machine from Fuji will allow you to do CP and CPk data as well as calibrate your feeders. Something to think about.
Electronics Forum | Wed Jul 04 12:22:07 EDT 2001 | davef
Several points: * Consider that your Cpk is probably different for both placing large and small components. * Probably your routine placement rate SB the speed you use to monitor the accuracy of your process. * Some people use a calibrated glass test
Electronics Forum | Fri Apr 05 02:05:33 EDT 2024 | ddfreeze
also swapped out DRAM sticks
Electronics Forum | Mon Apr 08 08:20:09 EDT 2024 | micropak
Can you try using a different set of DRAM sticks ?
Electronics Forum | Fri Apr 05 01:52:57 EDT 2024 | ddfreeze
Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software
Electronics Forum | Wed Apr 10 21:47:55 EDT 2024 | ddfreeze
have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?
Electronics Forum | Tue Sep 15 13:20:02 EDT 1998 | Jim Mitchell
Quad Systems sells the Samsung product with Quad's patented QuadAlign optics system and Quad feeders as opposed to the mechanical centering system available on the product direct from Samsung. Generally, all optical centering is superior to mechanic
Electronics Forum | Mon Sep 14 17:36:34 EDT 1998 | Robert Steltman
We are looking at a third P&P machine for our factory. I have received brochures on a SMASUNG CP30V machine. It looks great and has all the plus points for a contract manufacturing company such as ourselves. The basic specs are: 14400 cph - 3 heads
Electronics Forum | Tue Sep 15 13:30:40 EDT 1998 | Dave F
| We are looking at a third P&P machine for our factory. I have received brochures on a SMASUNG CP30V machine. It looks great and has all the plus points for a contract manufacturing company such as ourselves. The basic specs are: | 14400 cph - 3 he
Electronics Forum | Tue Jun 23 21:48:06 EDT 2020 | jmelson
I don't know much about Essemtec, I have been looking at Neoden a little. At least the Neoden is not in any way in the same class as machines like Assembleon or Samsung. I did download the manual for a Samsung CP45FV NEO, and the programming side o
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)