Electronics Forum | Fri Apr 15 13:25:40 EDT 2011 | tsvetan
agree, if you have fine pitch components the placement rate will be much less of what you see in the catalogues as they quote 0805 components placemen rate. I have one year log for one of our machine which is quoted to be 6400 cps and for one year a
Electronics Forum | Tue Aug 21 08:55:13 EDT 2001 | cjrjmj
I have a need to send some Engineers to intro SMT classes. I have found two avenues: 1)ACI (which is to high level!) 2)Cookson CPS which is more in line with intro to SMT process. Are there other that are on re-occurring timelines?
Electronics Forum | Thu May 02 14:07:53 EDT 2013 | duso02
I would suggest lowering the viscosity even more. Humiseal even sells 1B31 pre-mixed specifically for spray machines and the highest they go is 65cps.
Electronics Forum | Tue Mar 16 07:42:07 EST 1999 | Ben Kirk
| | Here is my question. We have several fuji CP's in our shop, every once in a while the first couple of parts placed are off the pads. When we move the parts further down in the sequence they are fine. What is going on? Has anyone had this problem
Electronics Forum | Mon Mar 31 17:18:15 EDT 2008 | pstone
I am looking for idea�s for board support on Fuji CP642 thru CP742 and IP 3�s. We have tried using the Grid-lock system which worked on the IP�s but not on the CP�s. We have also tried using the Ready-set system and had the same results. We are gett
Electronics Forum | Wed May 19 09:44:24 EDT 2004 | rlackey
Hello again Grant, In addition to our Fuji CPs we run Universal machines, and although they are pretty reliable, they are not in the same league. Regarding Fuji Placement speed we hit 30K plus on a couple of boards with no issues, but you do have t
Electronics Forum | Wed May 19 16:57:08 EDT 2004 | ricardof
We have in our facilities in Mexico more than 150 FUJI machines (CPs, IPs, QPs, GPs), they're in fact Bombproof, but it is not amazing to do that with 1206, SOTs on SOPs, we just feel a kind of disappointed with that 10K hours service, that means yo
Electronics Forum | Fri Mar 19 11:11:04 EST 1999 | Greg
| | | Here is my question. We have several fuji CP's in our shop, every once in a while the first couple of parts placed are off the pads. When we move the parts further down in the sequence they are fine. What is going on? Has anyone had this proble
Electronics Forum | Mon Sep 14 16:44:37 EDT 1998 | Steve A
| Reading some technical report I found the term "CSP", but no explanation. | I guess something about Chip Scale Package... but not sure. | Could someone please explain it to me? | Rgds, | Anderson You are absolutely correct. CSP is an acronym for C
Electronics Forum | Thu Feb 12 20:36:26 EST 1998 | Jon Medernach
| Using metal squeegees on GSPs has caused premature stencil wear. Has | anyone had any success with this combination? How much snap off did you | use? We are using .5 mm pitch and have a no clean process. Stencil wear is is minimal but exists. T
winsouce.jpg)
