Electronics Forum | Wed Jul 26 12:39:00 EDT 2006 | spari77
we encounter some open joint on the CPU socket after rework. We tried to reflow the boards again (using BGA rework machine) and found that the contact issue was resolved. Is there any risk to perform a reflow again on the CPU Socket boards without re
Electronics Forum | Fri Jul 15 16:51:55 EDT 2005 | Pete
I have a 570 with a failed CPU board. We may develop a replacement computer ourselves, is there anybody out there with 570, 710, 720's in need of a CPU?
Electronics Forum | Tue Apr 06 09:44:05 EDT 2021 | vasu278
Iam getting cpu hanging issues for accuflex printer but machine is running ok.can i install the software and drivers to another cpu which has different motherboard will work or any problems occur, if doesn't work can i reconnect old cpu and can i abl
Electronics Forum | Fri Aug 05 17:34:30 EDT 2011 | bobbydur
Hi, I have a faulty intermec printer CPU board. I'm probably in the wrong place but if anyone can give me some help, I would really appreciate it. I manage to connect an incorrect thermal printhead to the printer and I think it has damaged the CPU
Electronics Forum | Fri Jul 20 02:02:54 EDT 2012 | fujiphil
Have you ever try to replace the CP4 CPU card? Please try replacing CPU. Some cases, machine will boot normal. But no communication to the other machine.
Electronics Forum | Mon Aug 10 15:09:17 EDT 2015 | Stefan
We have a 3-zone reflow even, JetStream, manufactured by Automation Ltd., UK, in 2002. I am looking for a CPU board for it. Is there anyone that can help me find it?
Electronics Forum | Wed Apr 26 07:32:46 EDT 2017 | bk
If you open up the back panel of the unit where your mot boards and cpu are there is a panel with test points. You can test all the dc voltages there including the 5 and 12 volts ones for the cpu.
Electronics Forum | Fri Feb 09 14:49:04 EST 2024 | erikfriesen
Its looking like this was a CPU speed issue. The BIOS defaults to X3, and it needs X7.5 for the PCA-6180E CPU card.
Electronics Forum | Mon Feb 19 01:59:15 EST 2001 | dadi
I'm looking for a Transtarent & Non-Transparent PCI-to-PCI bridge that compliant with the Compact PCI Spec. This bridge must have the ability to be configured as Transparent or Non-Transparent. I aware to one chip that have those abilities. This chip
Electronics Forum | Thu Feb 04 18:16:53 EST 2016 | sonavc
Hi Thanks, help me to fix this old CP3. It ran great till now, I have problem the CPU board's Led HALF on . When the machine boot fine . it is good about 3 minutes then the CPU board 's Led HALF in always on. Turn off then back on sometime it is sho