Electronics Forum | Sat Oct 19 11:48:39 EDT 2002 | davef
Good points, John. Continuing to track on the voiding issue, why remove voids anyhow? * Voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on at least on a temporary bas
Electronics Forum | Fri Apr 08 05:10:10 EDT 2005 | siverts
What is Your customers requirements? Is the PCBA mounted with front/back connectors? Will the PCBA be mounded in a rack and connected to opposite connectors on the other side? In this case, if the warpage is more than approx 1-1.5 % You will then n
Electronics Forum | Wed Mar 26 09:19:20 EDT 2008 | nibirta
hi all...well i`m working in such a lab but we are working internally, and for our customers. But i can give you some prices from other labs. Cross section-one location is around: Solder Joint Integrity Std. sample plastic package $300.00 Shorts /
Electronics Forum | Wed Aug 27 08:06:43 EDT 2008 | davef
Thick, hard conformal coatings of acrylic, urethane and epoxy have a well documented history of causing solder joint cracks and breaking glass/ceramic and other brittle components. Dissimilar expansion and fairly high surface bond strengths of the ma
Electronics Forum | Tue Apr 07 13:17:10 EDT 2009 | tserra
I would recommend looking at SAKI/MacroScience. http://www.xraytechnology.eu/index.php?option=com_content&task=view&id=34&Itemid=42 I have seen the images created by MSX3000 from MacroScience which is now under SAKI and can tell you with certainty
Electronics Forum | Tue Sep 25 23:09:23 EDT 2018 | franknguyen
Hi, We are PCBA production company which factory's located in Vietnam. Somtime, we have to analyse failure of product to find out the root cause (ex: Micro-crack of solder joint under BGA IC...). We are searching labs around Asia (Vietnam, Malaysia,
Electronics Forum | Thu Dec 30 21:22:12 EST 1999 | Jim
Mike, Thanks for the reply. It's not really a matter of slope. It is the long term thermomechanical fatigue that the solder joint undergoes as a result of repeated severe temperature swings, while the product is in use. Non-leaded parts are suscep
Electronics Forum | Sun Dec 15 22:31:43 EST 2002 | craigj
Has anyone heard of vias cracking (barrel from pad) when being wave soldered. Was told this was a big problem by contract pcb designer, he always tent vias because of this. The reason was that the solder filling the vias caused stressing and then sep
Electronics Forum | Wed Dec 18 16:21:54 EST 2019 | jrow
Hello! We are having field failures due to cracking of the solder on our SMD micro switch components. I have been reading the IPC standards, and the only thing that it states regarding the solder profile/amount for Gull Wing component is "wetted fill
Electronics Forum | Tue Jan 16 12:32:36 EST 2007 | realchunks
You "guys" crack me up. OK, how about bottles of tequila?