Electronics Forum | Tue Oct 03 17:44:23 EDT 2006 | SWAG
I am trying to get a CyberOptics SE200 on line. Does anybody have any idea why the SMEMA interface is always telling the downstream machine that a board is available? It will not switch off no matter what running condition the machine is in - even
Electronics Forum | Mon Jul 29 09:24:30 EDT 2002 | pjc
Its nearly impossibile to get any Gage R&R on systems that require the operator to posisition the board to be measured. For this you need an automatic measurement system. There are many vendors out there in addition to CyberOptics, models SE 200 and
Electronics Forum | Mon Apr 28 08:52:10 EDT 2003 | davem
Chrissie, I'm glad you (and your people) made it through the painful process of reworking all those BGA's. Hope all your boards sucessfully pass test. Now on to the larger issue. In my experience, the solder paste screen printing process is (along
Electronics Forum | Mon Nov 04 17:29:34 EST 2002 | pjc
Cannot comment on "best buy". You'll have to determine what the better machine is for your application and duration of planned use. I suggest taking a field trip to each vendor's nearest demo facility with a few of your most hi-tech boards and stenci
Electronics Forum | Fri Jun 13 10:35:30 EDT 2008 | pjc
Its a bit of an old beast, it was replaced by SE 200 and is now discontinued (since 2004 I believe). Its a decent unit, but hard to achieve good repeatability on smaller deposits. Its also not reliable on small solderpaste below 20mil fine-pitch. Fai
Electronics Forum | Tue Aug 28 13:08:28 EDT 2001 | seand
Hello Everyone, Mountains and mountains of data in the archives. As a contractor the variables in your production lots don't help I'm sure. On a larger scale, one suggestion maybe to first look at when and where your tomb stoning is occuring. 1
| 1 |
winsouce.jpg)