Electronics Forum | Tue Aug 03 13:46:46 EDT 2010 | davef
2 Benchtop paste inspection * Synapse 3D Master 3000neo Desktop SPI Machine [Synapse Imaging; Room#102-505, SK VENTIUM, 522, Dangjeong, Gunpo-si, Gyeonggi, South Korea; 82 3 1436 0430 http://www.synapseimaging.co.kr] * ZC1000 [PTS System (S) Pte Ltd
Electronics Forum | Wed Feb 25 21:47:24 EST 2015 | dinhhuunam
Hi Marshall Bartel, SJ INNOTECH Printer is Best solution & Service for you ! HP-520S/HP-620S/HP-760S/HP-1000S Printing (±0.0125mm) Repeatability (±0.01mm) 0.3 Pitch QFP, 0402 Chip, Ø0.2 MBGA Speed/pressure control by printing section (5 sections) V
Electronics Forum | Wed Aug 28 10:16:12 EDT 2002 | Jim M.
Sam We install a lot of die in the SMT room using same process as SMT parts.Water soluble solder paste is used for attachment of die to ceramic and boards. Biggest problem i found is the adjustment from installing the die in the bonding area. The t
Electronics Forum | Wed Feb 11 00:34:42 EST 2015 | comatose
There isn't going to be much worthwhile used equipment out there if you mean true jetting - it is a pretty recent process. There are lots of used stencil printers out there, so from an up-front cost perspective, stencil wins. Jetting is slow. A hig
Electronics Forum | Tue Jul 13 16:19:05 EDT 2004 | Inspection Solution
Hi Mark, There are many tools available for measuring solder paste height. Most machines use laser as the basis for inspection while others use structured white light. If simple height and width inspection is all that is required, you can look int
Electronics Forum | Tue Dec 30 20:23:34 EST 2014 | jeff701
What does "maintain it really good" entail? For reference, this is our maintenance procedure for the FX-D: - At the end of an 8hr shift, the solder paste path is purged start-to-finish using Nordson's ValvePurge. The machine's then powered down and
Electronics Forum | Thu May 26 16:41:00 EDT 2011 | scottp
Here's what I do: - Test Surface Insulation Resistance (we're in the high reliability market and use a test significantly harder than IPC's). I also test SIR in combination with other assembly materials like conformal coatings and wave solder flux
Electronics Forum | Tue Aug 03 15:54:35 EDT 2010 | keiths487
we use a cyberoptics lsm 300, which IMO provides good service
Electronics Forum | Thu Oct 09 03:33:40 EDT 2008 | d0min0
depending on your needs and budget you can look at : cyberoptics koh young vision master or some simple stuff like SPIDA from Metronelec
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936