Electronics Forum | Thu Dec 09 13:22:24 EST 2010 | rodrigo
Hi All, I'm trying to use the F4G CP-4 optimizer. I cleared all the issues I was having except for this error I get at the end: Execute, 2030: Cycle Time table file not found I see a file in one of the folders named CP4_CYC.TBL but I'm not sure if
Electronics Forum | Mon Feb 21 08:44:10 EST 2011 | kahrpr
They all are inlineish They just carry the board to the vapor chamber. in a reflow system all the boards in the oven from beginning to end are in state of process, which gives you more speed. If the board has a long cycle time VP is not a problem. If
Electronics Forum | Wed Jan 13 16:48:52 EST 1999 | Doug Sanders
Question about HSP 4796A (36,000 cph). What is the maximum XY table movement to maintain 0.10 cycle time.
Electronics Forum | Tue Oct 16 18:43:10 EDT 2001 | Steve
Thanks for all of your suggestions. Since there are quite a few options, the selected method will depend on volume, tolerated cycle time, ROI, etc. I believe we will be dealing with relatively low volume, so I am going to investigate the selective w
Electronics Forum | Mon Mar 04 08:57:13 EST 2002 | DougS
I contacted IPC about the new IPC-9850 board used for machine characterization. Is anyone using this method for accuracy or cycle time between vendors? If you have, where did you get the boards and CAD/Gerber data from? IPC made the standard, but who
Electronics Forum | Mon May 20 21:28:22 EDT 2002 | davef
Are you sure you are using the correct solder paste question, once again. How many cycles times allow to proceed in reflow for these type of packages. => Dunno. What does the supplier say?
Electronics Forum | Thu Mar 27 11:11:00 EST 2003 | blnorman
We've evaluated the Rheopump. Problems we've found are 1) cycle time differences between forward and backward print (evidently the pump charges pressure on one and not the other), 2) excessive amounts of paste left in the tubes (roughly 60 grams we
Electronics Forum | Fri May 30 12:51:29 EDT 2003 | JB
I need info on loose pin vibratory feeders for Universal GSM. At this time we are presenting them in Matrix trays, and the cycle time is killing us. Any info on aftermarket Vibe feeder Companies would be great. Thanks JB
Electronics Forum | Fri Sep 24 05:39:15 EDT 2004 | vinitverma
Hi, Try Technomatix. That is the one used by Assembleon itself for the FCMs. You can buy the license from them for Assembleon FCMs as well as FUJI machines. The Assembleon PPS designed around Technomatix, gives a very very accurate cycle time calcu
Electronics Forum | Wed Sep 14 08:01:44 EDT 2005 | Rob
It's a functional test over a number of hours/days designed to give an accelerated life test, to detect possible faults, intermittants etc. You tend to run the boards in a hotter & harsher environment to reduce the test cycle time.
winsouce.jpg)
