Electronics Forum | Mon Dec 07 11:33:25 EST 2020 | ecogroup
Getting these errors: No command response from handler (0x1000) .... DpBlockWriteL: TimeOutWait for ACK .... Loading SYSTEM data to DPRAM is failed ..... Failed to create empty document ..... No command response from handler (0xffff) ..... Faile
Electronics Forum | Tue Feb 21 10:11:23 EST 2012 | vinitverma
The top level password allowed for customers is "specialist". All in small letters.
Electronics Forum | Tue Mar 06 22:47:16 EST 2012 | acsscott
Vinit, I email the files to you. Thanks, Scott
Electronics Forum | Wed Mar 07 09:16:20 EST 2012 | acsscott
ok, I'll give it a try and let you know.
Electronics Forum | Mon Feb 20 13:43:54 EST 2012 | acsscott
Having a problem at power up, that our Philips Topaz X displays "DOWNLOAD IO STN.DATA NG" in red. It times out after about 5 minutes, then comes up. When we try to find the origin, it gives an error that the "Head Down sensor is OFF". If we go int
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
Electronics Forum | Thu Apr 20 12:19:24 EDT 2000 | David
Data IO Corp. is a leading programming company in Redmond Wash. They also have equipment which will tape and reel the programmed components to go right on your automated assembly equipment. Worked quite well for us, but there may be others. Good luck
Electronics Forum | Mon May 10 01:20:07 EDT 2004 | longpham246
Hello! Check your stopper up/down sensor position. This problem has nothing to do with the proper data. Sometimes the sensor position is not correct or sensor contact could cause this problem even I/O mode was OK. Regards! LMQ
Electronics Forum | Mon Feb 20 19:52:31 EST 2012 | assybkr
Try "operator" or "administrator" if this doesn't work hopefully someone else can help you. Good luck.
Electronics Forum | Mon Feb 27 10:12:51 EST 2012 | acsscott
OK, Used specialist to enter the machine config at power up. We don't have a Tray Changer option listed.
