Electronics Forum | Thu Mar 18 18:07:21 EDT 2010 | grahamcooper22
Hi, First check what the Moisture Sensitivity Level of the LEDS is....you may need to ask the LED manufacturer. Once you've established it is moisture sensitive then follow latest version of IPC JEDEC 33 spec. for storage of them and drying them if t
Electronics Forum | Fri Mar 19 03:50:37 EDT 2010 | grahamcooper22
Some things you have to be sure of... Can you guarantee the LEDS are DRY when you receive them ? They may be packed in dry bags but when was this done and has the LED distributor had them open at his site ? Using vacuum sealed dry packs is a good way
Electronics Forum | Thu Jun 19 13:21:53 EDT 2003 | kmccarten
I am currently working with Toyo Living, a manufacturer of Desiccant Dry Boxes. These boxes are specifically deisned for the electronics industry offering options of N2 Purge, or ultra-low flow, Out of spec Humidity alarms, Door Alarms, Data logging
Electronics Forum | Fri Mar 19 03:13:35 EDT 2010 | mun4o
Hi, First check what the Moisture Sensitivity > Level of the LEDS is....you may need to ask the > LED manufacturer. Once you've established it is > moisture sensitive then follow latest version of > IPC JEDEC 33 spec. for storage of them and dryi
Electronics Forum | Tue Jun 17 09:00:58 EDT 2003 | fmonette
Good question, here is the short answer : The problem is that dry storage is not the same as a bake process. If you want to bake saturated components, this should be done at higher temperatures. The IPC/JEDEC standard provides a table with bake temp
Electronics Forum | Wed Sep 13 08:08:56 EDT 2006 | meritajs
Hi Davef and Rob, Thank Davef for your advice,we will make "dip&look" soldering test. Rob,we are tolking about companents storage time after manufacturing. Sometime we get companents which was shipment more then year ago In many cases we have problem
Electronics Forum | Sat Jan 20 20:54:03 EST 2001 | fmonette
Dear Mike, As you might have noticed from the labels on the dry bags, the maximum floor life is specified by the component manufacturer and it can range from 1 year (level 2) down to a few hours after mandatory bake (level 6). This limit is based o
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Electronics Forum | Tue Aug 19 09:48:07 EDT 2003 | D Peter
No, we don't have nitro. We may go that way if we can't find decent data from anyone other than the food industry on vacuum drying. I'm just more comfortable with low water/O2 content by removal rather than displacement.
Electronics Forum | Wed Oct 26 23:29:57 EDT 2005 | milroyperera
Hi, As I have seen in the data sheets from solder paste suppliers they always recommend to keep the solder paste until it reaches the ambient temperature after taking out from normal storage temperature. Mostly the storage temperature is 5 - 10 Cels
winsouce.jpg)
.gif)