Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
Electronics Forum | Thu Jun 06 08:16:13 EDT 2002 | caldon
Jim- Sorry I can not offer advice on the Panasonic machine but do want to shed light on the Die and waffle pack issue. Take note that if the Die are loose in the pockets the balls or terminations could be damaged. The thin layer that the ball is atta
Electronics Forum | Thu Sep 23 10:28:33 EDT 2004 | JB
We are placing labels using a Hoover-Davis feeder with a GSM. Anybody else out there doing this? My question is: Are you using a special nozzle for this operation?
Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank
We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?
Electronics Forum | Fri May 31 16:26:22 EDT 2002 | Feederman
Steve, you might want to check out the pre-printed and print-on-demand label feeders that are available through Hover-Davis. These types of feeder remove the potential human placement errors which sometimes occur. The feeders are available for most p
Electronics Forum | Fri Jan 17 16:42:47 EST 2003 | MA/NY DDave
Gee this was a fun tread. I guess you mean Univeral Instrument Corporation's products. I would give them a call since they have a training center in Binghamton, NY and may have what you need. Trust me, They need the business and should jump all ov
Electronics Forum | Mon Oct 24 16:10:07 EDT 2005 | Brian Davis, Compex Technologies
Dear Colleagues, We are looking at entry level AOI solutions. We are currently evaluating the Mirtec AOI MV-2HTL. We are also looking at Vitech because of their perceived "edge" in the industry. I know that this forum has approached this question be
Electronics Forum | Thu Jul 09 23:35:40 EDT 2015 | wedo
Why do you say that MyData tech support is no help?
Electronics Forum | Thu Jul 09 11:12:43 EDT 2015 | quaker332007
We have a mydata MY100DX and A Hover-Davis label feeder. I'm have issues picking up the label. The machine will place it fine for a few then stop and refuse to pick up the label. Is anyone using this configuration and if so do you have and points
Electronics Forum | Fri Jul 10 08:36:48 EDT 2015 | quaker332007
Why do you say that MyData tech support is no > help? Because I was on the phone with them for more then an hour with no help. Tech support has no experience with this feeder. That is why I'm asking if anyone here does.
