Electronics Forum | Fri Sep 26 21:06:28 EDT 2003 | adlsmt
Ken, I am still negotiating a possible deal with the company I referenced, therfore I will not mention the name now. If it falls through I will let you know. However I have made it clear to them that their second user atitude stinks and is still sway
Electronics Forum | Thu Jan 08 16:16:09 EST 2004 | Dean
My first concern would be the choice of solder paste you have. There are better chemistries out there that far exceed the capabilities of the 609 2. Yes, the part will partially float on the solder (assuming plastic qfp). Cross sectioning would sho
Electronics Forum | Wed Dec 15 16:38:42 EST 2004 | patrickbruneel
Here's my 10 cents Studies done in the 1980's concluded that pure tin was prone to whisker generation. A tin content lower then 70% became exempt from this phenomenon. I have never seen or done any studies on the impact lead had in reducing the pote
Electronics Forum | Fri Jan 05 12:17:31 EST 2007 | Cmiller
Our first pass yield across all our products is above 95% but we include anything that does not meet IPC standards. Probably 75% of our failures are not electrical. AOI is a great tool to get a consistent measure of your process. I dont know how anyo
Electronics Forum | Sun Oct 26 09:05:09 EDT 2008 | tony_d
Hello INGE FI, I know what you are going through. A few years back, I was faced with having to purchase AOI equipment for my business. My selection team and I looked at several different AOI manufacturers. We found that only two AOI vendors were sui
Electronics Forum | Tue Oct 14 09:51:20 EDT 2014 | rgduval
I've always used multiple verification, and it's worked rather well. But, it depends on the people that are doing the verification, and their commitment to accuracy. It also requires a little bit of extra time. Given your system, are you still get
Electronics Forum | Tue Mar 02 02:46:36 EST 2021 | Jessie Gao
If there is a way to ensure that the product is reliable, it is to ensure the predictability of its PCB, which is an important part of the product. In fact, PCB is the core component in almost all electronic products (from phones to computer systems)
Electronics Forum | Tue May 08 11:27:49 EDT 2001 | Eyal Duzy
I will review some of the advantages/disadvantages of AOI vs. X-Ray one by one according to the main differences that you may find between them. * AOI uses optics that can "see" only visible elements. X-Ray can "see" hidden elements. There is a ve
Electronics Forum | Tue Jun 26 19:50:00 EDT 2001 | davef
49 hits on nitrogen, you probably used the one with the entry window => 13 or whatever hits on nitrogen. Here is my take on what you missed by using the other seach: Date: May 26, 2001 04:57 AM Author: Brian Sloth Bentzen Subject: Nitrogen Reflow
Electronics Forum | Wed Mar 17 02:14:39 EST 1999 | Joe
| | We are having a small number (~2%) of our boards pass our manufacturing diagnostics, fail once they reach the customer, fail when they get back to us and then start working again after handling them for a short time. We have eliminated a lot of
