Electronics Forum | Fri Mar 13 17:43:16 EDT 2015 | loganting
how helpful is it to use alignment weighting over fiducial offsets ?
Electronics Forum | Fri Mar 13 17:11:23 EDT 2015 | loganting
2 fiducial alignment vs 3 fiducial alignment , any opinion ? When do we actually need the third fiducial for alignment ?
Electronics Forum | Tue Mar 08 15:52:00 EST 2016 | sarason
Dead sensor ? Try a little of your consumable directly on the sensor while monitoring it's output with a multimeter. sarason
Electronics Forum | Tue Mar 08 23:02:18 EST 2016 | dekhead
If it is a Vortex Cassette error, that is based on "Cassette Life" Programmed into Product file. Maybe erroneous software setting.
Electronics Forum | Tue Mar 07 09:23:20 EST 2017 | buckcho
You can. It is an option from Dek and you can buy it. It is not as good as SPI, but if you don't want to check all pads it is okay.
Electronics Forum | Tue Apr 11 06:37:48 EDT 2017 | proy
I have yet to find anyone at DEK to talk to and purchase. I will use it on corners , edges and critical parts only . This is a simple matter of user feedback when the past roll is getting too small.
Electronics Forum | Wed May 31 07:59:47 EDT 2017 | buckcho
Or if you have 2010 Dek, you can get the paste height monitoring system, which is pretty cool. I used it and for Lead free paste is great. Combined with the dispensing system I made my operators very lazy :)
Electronics Forum | Thu Jun 08 16:42:38 EDT 2017 | sumote
Looking to find out I can add 2D vision to this > 2010 horizon printer...... For all things DEK, John Spangler is your guy. http://www.dekhead.com/
Electronics Forum | Mon Sep 02 23:56:08 EDT 2013 | dekhead
Looks like too many signals there for a DEK SMEMA board to handle; trying to translate / ascertain what signals those are, to offer possibilities to communicate with DEK; However would pretty much guarantee a need for hardware change (personality car
Electronics Forum | Fri Mar 25 06:20:13 EDT 2016 | buckcho
Hello, does it show which consumable it is? It looks simple - all consumables on Dek 03 require for them to tell them that you are replacing them in the proper menu, otherwise will give you error even if you replaced them. For example you can check a
.gif)
