Electronics Forum | Tue Jul 31 03:06:11 EDT 2001 | Lex WW
I am planning to evaluate DEK's Formflex board support system in our plant soon. Does anyone have experiences with this? I know that the grid of pins "locks on" to a particular product after the initial setup, but am curious to know how each individu
Electronics Forum | Thu Sep 20 13:28:23 EDT 2001 | ohanlon
Here is how the FormFlex system conforms to component variations. The FormFlex system utilizes an oil chamber that is common to ALL the pins once the system is set. Pushing down one pin will cause the displaced oil to be shared by all the others pins
Electronics Forum | Mon Feb 02 14:30:32 EST 2004 | kauer
Could be an intermitant card, or encoder issue. Sounds like the machine is giving this error because it is loosing track of one of the axis and instead of trying to move something and possibly crash, it locks up in error mode. Could be something as s
Electronics Forum | Tue Sep 05 08:40:33 EDT 2006 | CL
SMAINTECH, Good Morning, We have installed the Gridlock tooling pin with stealth mode on our DEK's. It is a hard tooling pin array that resets the height if the pin for every board. The pin comes up until it comes into contact with something then lo
Electronics Forum | Mon Sep 20 13:05:05 EDT 2010 | dman97
Hi, Yes I tried to do that. When I stick a key inside the slot, I still get a system suspended error. Although I can press the system switch and I can hear the locks engage, but nothing happens. the machine still thinks the covers are opened and
Electronics Forum | Wed May 23 18:45:57 EDT 2012 | stentech
I would agree with Sr Tech..Grid lock and systems like this can be used on the Ekra, MPM and DEK printers also can be used in Pick and place depending on the density of pin. If you choose the method of printing out a 1:1 photoplot. Glue it to a piece
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Thu Dec 22 16:59:39 EST 2022 | goseese
My problem was the BGE9010C. Any time there was any pressure on the rising table the error would occur. I was not able to find a replacement BGE9010C so I opened it up and found some blown components. Replaced them and the problem was solved. I "
Electronics Forum | Sat Mar 04 16:56:13 EST 2017 | crecinos
A dispensing glue machine that you recommend? Currrently I am using a DEK 03iX for this operation, but cycle time is too slow, so I am looking for a glue dispensing machine, fast and with very good accuracy.
Electronics Forum | Mon Mar 06 15:58:10 EST 2017 | bk
Ok i must be missing something. You are using a dek 03i screen printer for glue and it's not fast enough? there is no glue dispensing machine that i know of that will ever be faster then a screen printer at doing glue dots