Electronics Forum | Thu Jun 01 13:15:42 EDT 2023 | dontfeedphils
I've had decent experiences with MPM, but most of my experience is with Dek printers, most currently a NeoHorizon 03iX. No major issues, happy overall with them.
Electronics Forum | Fri Oct 26 11:29:41 EDT 2001 | kaopsahl
I have two DEK 288s set up in our shop, we used to use a Fuji GSP_III. I could not possibly say enough good things about the DEKs - they are incredible. The only real complaint I have with them is that if an error pops up that locks up the software -
Electronics Forum | Thu Apr 14 06:54:02 EDT 2005 | teera
hi! below are the item need to check: 1)top plate condition(under screen squeegee). 2)under screen clean contact position(with stencil) 3)make sure the thickness of wiper paper not so thick(not over 6o gm)becaue it will effect the vacuum suction. 4)s
Electronics Forum | Thu Nov 08 05:55:38 EST 2007 | jola
Hi. We have a medium to high volyme production with a lot of different boards to run inour lines. We do some prototypes as well but not as our main production. We have a lot of change over time that we try to reduce and as far as it's not double side
Electronics Forum | Mon Sep 20 18:27:13 EDT 2010 | ratsalad
dman, This happened to me once on a GSX, but the head was not all the way up. I ended up shutting the machine down, inserting a bypass key so it thought the head was lowered then turning it back on. Then I told it I wanted to raise the head, hit
Electronics Forum | Mon Oct 05 07:48:12 EDT 2020 | tamasmagyar
Hi Smitty, I am currently using Manual Lock Red-E-Set, and never had problems with damaged components. Although at my last workplace, we used VarioGrid, and encountered same problems as you. I suggest checking the pins on the support tools(s) you h
Electronics Forum | Mon Jan 30 06:29:44 EST 2006 | robls
We are a Contract Manufacturer in South Africa. We currently have a Speedprint SP200AVI fully automatic printer with 2D vision etc etc. We require a second fully automatic printer and are busy evaluating a DEK Horizon 03i. We have found good points
Electronics Forum | Mon May 13 03:37:41 EDT 2019 | relaycz
Hi, I work at an electronics manufacturing company and right now, we are selecting a new screen printer instead of our old Samsung SP-450. Does anyone have some experience with these machines or at least manufacturers? These ones are basic and sim
Electronics Forum | Thu Sep 20 09:12:28 EDT 2001 | jschake
If you were successful in running the machine in dry cycle mode, then I would expect with new squeegees that the prints would be acceptable. To give you more tangible data on what you may expect from the actual print results, maybe you could run the
Electronics Forum | Thu Jan 13 03:56:45 EST 2022 | goseese
Hello, and thank you in advance for your help. I have just received a used DEK 03i and I am having a problem that I don't know exactly how to troubleshoot. The DEK will power up correctly and everything will initialize. When I try to set up a n