Electronics Forum | Fri May 29 14:19:14 EDT 2015 | dekhead
Offsets are there to for an alignment change over the entire board... alignment weighting is, essentially to account for imperfect match between stencil and board, and will allow you to concentrate best alignment to a given portion of the board (give
Electronics Forum | Wed Mar 21 14:58:23 EDT 2018 | edjeske
Thank you for your response. I appreciate all anyone can provide to help with this. I have no manuals to use. I inherited this task when the usual operator dropped dead the other day. He was the only one who ever ran this machine. I was able to print
Electronics Forum | Tue Nov 20 18:56:19 EST 2018 | dekhead
If always on... you will need to write product file as edge justified, and position stencil properly before auto-clamping takes place. If always off... you will need to write product file as center justified... and position stencil and acknowledge st
Electronics Forum | Thu Aug 23 10:16:43 EDT 2012 | dontfeedphils
There are a couple of things that I would check. Check the board clamps and make sure that they're in good shape and that they're actually holding the board securely. If those check out I would take a look at the fid camera and make sure that every
Electronics Forum | Tue Dec 31 13:44:57 EST 2002 | burb1999
Does anybody know of a manufacturer of board stiffeners to put on the edges of PCBs when there going through the oven? I have seen some that C-clamp on the edges which I would prefer but don't have any info on them.. Thanx, Todd
Electronics Forum | Mon Aug 27 09:56:00 EDT 2001 | stefan
I wonder what kind of equipment the board designer had in mind? Are you shure you can do the board with a Mydata ? Where do you put the tray for your 20 mil QFP's? 10 mm thick plus component height also appears to be a problem. Multitroniks can do la
Electronics Forum | Mon Dec 20 07:09:03 EST 1999 | Christopher Lampron
Ron, The simplest way to process fexible PCB's that I have found is to use a process carrier fixture. There are companies that manufacture process carriers that are capable of holding flex through stencil, placement and reflow. The carriers are capab
Electronics Forum | Thu Aug 23 02:31:14 EDT 2012 | fox_su
Hi! We have a dek 265 gsx printer. And we have a problem with it. After determination of fidutials it puts the paste differently. Sometimes it puts senterline, sometimes left of center and right of center. We can't identify the problem. Could you pl
Electronics Forum | Fri Sep 07 17:13:54 EDT 2012 | burb1999
Run the calibration screen/procedure. I have had where the camera was hit etc.. and caused a misalligned print.
Electronics Forum | Wed Nov 06 12:52:28 EST 2002 | charlie
Check out one of the board suppport that are currently available: Grid-Lok, Formflex and others. These systems are available for many models of printers and P&P. They automatically set up to any board, first or second side, and provide excellent su
