Electronics Forum | Tue Mar 20 18:28:26 EDT 2018 | dekhead
Print Head Stroke Calibration?
Electronics Forum | Wed Mar 21 14:58:23 EDT 2018 | edjeske
Thank you for your response. I appreciate all anyone can provide to help with this. I have no manuals to use. I inherited this task when the usual operator dropped dead the other day. He was the only one who ever ran this machine. I was able to print
Electronics Forum | Mon Oct 11 17:06:55 EDT 2004 | M Deren
We have a DEK 260 with a intermittent table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving haphazardly in small increments back and forth or vibrates as if it wants to mo
Electronics Forum | Wed Oct 13 17:05:02 EDT 2004 | kmakiya
I have seen stepper motors chatter or vibrate when it has lost one of its phases. You've replaced everything but the cable so I think you are right that it should be checked for an intermittent connection.
Electronics Forum | Mon Oct 11 17:02:06 EDT 2004 | M Deren
We have a DEK 260 with a intermittant table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving hapazardly in small increments back and forth or vibrates as if it wants to mov
Electronics Forum | Fri Aug 20 11:19:47 EDT 1999 | John
Does anyone have an older DEK 260? I was wondering if a 1995 model 260 with DeKAlign 2 is capable of printing 12 mil fine pitch reliably. (Assuming that it is in good working order) Thanks for any input!!
Electronics Forum | Mon Oct 18 10:55:17 EDT 2004 | DenisM
Check the ground plane for noise with a scope. Steppers are very sensitive to spurs and will step in response to noise. Resistance welders on the same ground loo[ can be a problem as can seam sealers etc. Denis M Manncorp
Electronics Forum | Mon Aug 23 10:28:51 EDT 1999 | K
You should have no problems with this. Are you thinking of buying one or do you already have one - either way it would be worth upgrading to DeKAlign 4 K | Does anyone have an older DEK 260? I was wondering if a 1995 model 260 with DeKAlign 2 is
Electronics Forum | Wed Mar 26 19:00:48 EDT 2008 | darby
Also check your belts/tensions/pulleys and motors on the camera axis. If you are getting any slippage then the camera will not be in the position the encoder says it is. It may still read the fids but will produce an offset.
Electronics Forum | Thu Jul 21 22:22:50 EDT 2005 | Ken
Hey, Peter. back in the mid 90's I reversed engineered their drive system because of a dispute over print speed malfunctions. I prooved correct that they had made published claims about their drive topology that were not true. They agreed to redes
winsouce.jpg)