Electronics Forum | Mon Jan 20 17:37:30 EST 2020 | sumote
Here is a picture of the inside of my machine. https://drive.google.com/file/d/1hsLLHz1ho867qcSf7AYUoivUUn8NFbH6/view?usp=sharing
Electronics Forum | Thu Feb 15 16:46:07 EST 2007 | flipit
CK, That is the exact machine I had. I bought a Dek 265LT in 1997 or late 96. Was one of the first Dek 265LTs made. Never had to use epoxy blackened fiducials and it worked great with 1/2 etched or laser cut fiducials. Chris
Electronics Forum | Tue Aug 27 09:26:59 EDT 2013 | felo188
Hello, I have a problem with SMEMA communication between LSB 03 PCB destacker and DECK 265. Unfortunatelly LSB have 37-pin SMEMA socket. I am trying to make adapter. Based on datasheets of LSB and IPC SMEMA 9851. I tried various combinations but w
Electronics Forum | Mon Jul 30 01:14:37 EDT 2018 | erici
Our DEK 265LT wont boot up with the DEK software. It says that the current version of the software can only run a 265GS printer, and to install the correct release of the software. Has anybody encountered the same problem? It just started happenin
Electronics Forum | Tue Feb 08 17:17:49 EST 2005 | Randy Gray
Does any one know the fine pitch print capability on a DEK 265GS?? Thank you
Electronics Forum | Thu Mar 19 07:57:13 EDT 2020 | leeg
Which model of Dek265 is it?
Electronics Forum | Fri Oct 29 15:29:56 EDT 2004 | jasont
Hi Ran, Have you considered 2nd hand screen printers? We are an SMT equipment re-seller but also operate a subsidary CM factory in SuZhou, China . We use Dek 265 LT and MPM AP screen printers in our SuZhou factory and have the following in stock f
Electronics Forum | Fri Jan 17 09:17:49 EST 2020 | sumote
Hello all. We recently purchased a DEK Hroizon to replace our aging 265 machine. The 265 had an auto-loading stencil setting known as a "Distance To Image" where it would place the stencil directly over the board. The Horizon 2 has no such feature.
Electronics Forum | Mon Jan 20 03:13:34 EST 2020 | silverlead
Included screenshots from DEK manual, outlining stencil depth adjustment. Basically, distance from rear of the stencil to the front of the image is value needed to be set on scale when positioning stencil. There is an other way to adjust stencil, by
Electronics Forum | Tue Jan 21 08:49:42 EST 2020 | emeto
I am sure you can upgrade it with DEK and it should not be so expensive. You can also ask them the price of the auto system. This is an arm(controlled by cylinder I think) and software to control it. This one moves the stencil in place when you load
