Electronics Forum | Tue Nov 20 09:10:57 EST 2018 | dekhead
What sensor are we talking about? Detecting entering / exiting machine? Detecting at load position? That is not part number but presumably connector number, but not locating in dwqs.
Electronics Forum | Tue Nov 20 18:42:03 EST 2018 | sabeti
Hi There, Thanks for your reply. Yes, this is the sensor which is creating the problem currently. The sensor is faulty. Is there any way to bypass the sensor to get the machine running? Thanks
Electronics Forum | Mon Apr 13 14:04:49 EDT 2015 | capse
Juki GL-1.... Any thoughts? I'm New to the > industry and I'm trying to buy a new screen > printer. I have two in mind, DEK and Juki. Up front qualifier, I'm the EKRA Rep for the southeastern US. I have been involved with stencil printers for abo
Electronics Forum | Thu Mar 04 08:49:12 EST 2004 | ianlg
Hi Kistech is a UK based company. The MD is a David Wheatley who was one of the founders of SMTech Ltd who designed and manufactured the 100MV prior to the company being purchased by MPM. The microflex is a re-engineerd version of this machine. The
Electronics Forum | Tue Mar 02 17:26:24 EST 2004 | pjc
I worked on MicroFlex. All axis move via electric motor drive. Carraige reapatability is +/- 0.0005" (12 micron). Cameras position more easily on linear bearings than the swivel type. The alignment accuracy and repeatability easily supports sub-20mil
Electronics Forum | Mon May 13 08:31:48 EDT 2019 | robl
Do you have in line 3D Solder Paste Inspection machines? If not the 2D inspection on the SP710 is very slow & not a patch on Hawkeye from DEK. If print time is not an issue then it doesn't matter. I have had both types of machine, and personally pre
Electronics Forum | Fri Apr 26 12:47:07 EDT 2019 | bane016
Good day, I need to turn on option before start printing to aprove by 2D code stencil and type of paste. I don't know exactly how to turn it on that option on machine. I have 2D and barcode scanner. Thanks in advance for help.
Electronics Forum | Mon May 13 03:37:41 EDT 2019 | relaycz
Hi, I work at an electronics manufacturing company and right now, we are selecting a new screen printer instead of our old Samsung SP-450. Does anyone have some experience with these machines or at least manufacturers? These ones are basic and sim
Electronics Forum | Thu Apr 29 14:41:12 EDT 2004 | pjc
OK if the paper is transparent and you can adjust the table X-Y-Theta under the paper- without moving the paper - the align with the solder lands on the board. If you have a DEK or MPM machine, the Mylar frame is like $300. I belive other printer mfr
Electronics Forum | Mon May 13 09:45:39 EDT 2019 | spoiltforchoice
Interesting, I've not had a hands on with either Hawkeye or Ppeedprint SPI, however I was under the impression that speedprint printers give you an awful lot of printer for your money, comparing quite favorably with Asian brands with strong feature s
