Electronics Forum | Mon Apr 22 09:07:43 EDT 2002 | pjc
Francis, The potting encapsulation process was in the mfg. of flash-disk devices built on a DIP formfactor. Compact flash do not normally get potted. Ultrasonic welding or snap-togther is methods for closing the compact flash housing. The potting mat
Electronics Forum | Fri Aug 26 09:39:21 EDT 2022 | compit
The emulator doesn't work that way. You can create only 1.44 MB partitions (e.g. 100 pieces on one flash drive) (with the supplied software) and they will be visible as floppy disks. It is not a USB port.
Electronics Forum | Thu Apr 18 21:34:35 EDT 2002 | davef
Nothing special. [Follow your paste supplier's recommendations for reflow.] SanDisk� NAND flash memory are sold as TSOP [thin small outline package] devices. Here�s what the innards of a card looks like: http://www.mittoni.com/information/insidecf
Electronics Forum | Tue Feb 27 05:54:19 EST 2007 | m7mdshms
I want to replace my FDD with a driver to read flash memory instead of Floppy disks, but uses the ordinary floppy interface on pc mother board
Electronics Forum | Fri Oct 27 10:43:08 EDT 2017 | sumote
i believe someone has left a floppy disk in the drive. eject it and reboot.
Electronics Forum | Fri Jan 23 13:14:36 EST 2009 | gregcr
Hi All, I have an aquastorm 100 that I need to upgrade the motherboard in. If anyone has one of these machines could you take a look and see what the MFG & MFG part number of the mother board is. The new board has a FLASH memory drive rather than
Electronics Forum | Tue Sep 16 13:34:26 EDT 2014 | gascon5383
we are checking two fiducials on this product, as for most products. its always the first fiducial it checks where the camera light flashes and wont take a picture.
Electronics Forum | Sat Sep 08 16:02:44 EDT 2012 | processman
hi, We have a strange issue with a DEK 265 Lt, it powers up and initialises fine. Camera LED`s flash, cognex card intitialises with no error. The issue is we have no fiducial recognition or image on the monitor. Have swapped out camera, cogn
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Sun Jan 06 22:08:09 EST 2008 | mac88
Hi, Try to upload the Windows NT in Safe Mode. Would look weird, but is fully functional. Then try to go the latest known workable configuration and load it. If this does not work try with the recovery disk that came with the machine. This will
