Electronics Forum | Sat Mar 27 23:03:21 EDT 2010 | dman97
Well I'll be damned! I was printing this on the fiducial side. Silly me. I should have read the manual closer. Thanks for the help.
Electronics Forum | Sat Mar 27 23:44:16 EDT 2010 | dekhead
You were doing it right... for a 288. 3rd or 4th time in the last year or so I've had somebody do that. Glad I could help. http://www.dekhead.com
Electronics Forum | Thu Apr 01 23:53:26 EDT 2010 | dekhead
Sounds like SPC data collection is turned on with post print alignment inspection. Needs to be changed to "NONE" http://www.dekhead.com
Electronics Forum | Sat Apr 03 14:17:26 EDT 2010 | dman97
Thanks again for your help. I never would have guessed to check the SPC data settings because we never use it. Thanks so much!
Electronics Forum | Thu Apr 01 18:13:19 EDT 2010 | dman97
Since my last post, I have successfully calibrated my printer. Now I have noticed that after a print, the machine decides to check for fiducials again. A post print fiducial check. Do you know how to disable this? It is slowing down my process co
Electronics Forum | Fri Mar 26 23:07:07 EDT 2010 | dekhead
Just a guess: Are you printing your fiducials on the fiducial side of the board? Fidicial Side is for Vision Calibration, Bare Copper Side is for Offset Calibration (Step 5 of procedure says "copper side uppermost"). After printing 25 fiducials o
Electronics Forum | Fri Mar 26 21:48:56 EDT 2010 | dman97
Can someone explain to me what I'm supposed to do after I have done the vision offset calibration procedure? The manual tells me to put solder paste down on all 25 holes of the stencil. After this the board drops down and the machine scans each fidu
Electronics Forum | Mon Dec 14 06:26:16 EST 2015 | fredmoulin
Hi guys, I got a problem with our DEK 265 GSX : This message appears : 1300044 - Failed to perform Lighting calibration. Please, what does it mean, and how can I solve it ? Thanks very much.
Electronics Forum | Tue Mar 22 16:12:30 EDT 2022 | dekhead
Most likely corrupted vision calibration. Reload backup calibration from floppy (of available), rerun calibration ("Calibrate Vision")
Electronics Forum | Tue Mar 29 14:43:50 EDT 2022 | padawanlinuxero
Hi! Looks likely you have a calibration problem with the vision system, since is a 265 if possible try to restore a backup on floppy if not rerun the calibration procedure
