Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Thu Jan 04 11:07:59 EST 2018 | ilavu
Ray, Did you solve this problem? I am having same error on same model machine. My problem is, when camera axis moves to look at the first fiducial, camera hits to the cleaner and error comes up with rising table error, camera axis not home. Even log
Electronics Forum | Mon Oct 24 14:01:18 EDT 2022 | angela t
Do you know what the difference is between the DEK Horizon 03IX and DEK Horizon 8 printers?
Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu
Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.
Electronics Forum | Tue Nov 01 13:15:56 EDT 2022 | dekhead
Yes
Electronics Forum | Mon May 02 21:26:23 EDT 2022 | rob1
I have a problem with DEK 265 Horizon. During camera being homed after checking the fiducials, the camera failed to home properly and crashed into the back of the machine in the Y direction. I homed the camera in the Y and it appeared OK and I could
Electronics Forum | Sat Jan 18 18:23:15 EST 2020 | dekhead
Similar to this on Horizon i. 2 different versions used on Horizon; crank on standard chase, slider (as shown) on ASM.
Electronics Forum | Thu Jun 14 18:34:01 EDT 2018 | jacobidiego
We have horizon 03i and neo horizon 03ix
Electronics Forum | Sat Sep 13 09:55:05 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can repair the Green firewire camera (Cyberoptics) off the Dek printers. I had 2 go bad and would like to get them fixed if possible so I would have backups. Thanks in Advance
