Electronics Forum | Wed Aug 30 08:06:45 EDT 2006 | scombs
The reason I asked earlier about Gridlok is that we are using the on 2 Dek Horizon printers (since Jan 06) with edge clamps and they work well. We run them in Auto mode so they conform to the board at each print so I do not have to worry about the op
Electronics Forum | Fri Apr 21 00:56:44 EDT 2006 | pavel_murtishev
Good morning, MPM AP25 we have is equipped with dedicated vacuum support only, no side snuggers. Also we had a lot of issues with fine pitch paste deposition due to this poor support. Vacuum support can�t fix wrapped boards properly causing a lot of
Electronics Forum | Fri Feb 02 12:57:41 EST 2024 | spoiltforchoice
Arguably there is essentially one model the SP700 or 710. If you don't need 29" there is also the discontinued 210. However I don't think the brand matters all that much. You want what you can find at the right price and you need the options o
Electronics Forum | Thu Mar 30 10:02:03 EDT 2017 | Bestglobal SMT
We have a 2008 DEK horizon 03i this machine has been a very reliable system. we are having an issue with the print being offset in the x .2mm I have run 4 different boards - same issue on all. same offset. i can print the board 10 times over and
Electronics Forum | Fri Mar 11 13:03:08 EST 2022 | poly
I've just bought the pick and place machines (universal Genesis GX11 and GC30) and oven (RO300fc-c) but I am confused about printers. I've put in an offer for an MPM Accela (2006 or 2008) but I'm not sure if it's a good idea / deal. It's being sold i
Electronics Forum | Sat Nov 09 19:37:52 EST 2019 | kylehunter
> the issue is the calibration. What you set it for > has to match what it actually reads or you get > the error screen at the end of every pass. If > you go into the maintenance menu ( using the key > next to the system button )
