Electronics Forum | Fri Mar 13 17:43:16 EDT 2015 | loganting
how helpful is it to use alignment weighting over fiducial offsets ?
Electronics Forum | Fri Mar 13 17:11:23 EDT 2015 | loganting
2 fiducial alignment vs 3 fiducial alignment , any opinion ? When do we actually need the third fiducial for alignment ?
Electronics Forum | Fri May 29 06:50:04 EDT 2015 | buckcho
Hello, can you explain better what do you want to check? Alignment is done based on fiducial check and then you can do some offsets, based on the print. So I am not sure what do you want to say...
Electronics Forum | Fri May 29 14:19:14 EDT 2015 | dekhead
Offsets are there to for an alignment change over the entire board... alignment weighting is, essentially to account for imperfect match between stencil and board, and will allow you to concentrate best alignment to a given portion of the board (give
Electronics Forum | Fri Apr 29 23:52:03 EDT 2022 | Stevekilic
Hello, I have a problem with Dek horizon 03ix machine software hangs on the start screen. What could be the matter.
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Thu Jun 08 16:42:38 EDT 2017 | sumote
Looking to find out I can add 2D vision to this > 2010 horizon printer...... For all things DEK, John Spangler is your guy. http://www.dekhead.com/
Electronics Forum | Tue Mar 07 09:23:20 EST 2017 | buckcho
You can. It is an option from Dek and you can buy it. It is not as good as SPI, but if you don't want to check all pads it is okay.
Electronics Forum | Tue Apr 11 06:37:48 EDT 2017 | proy
I have yet to find anyone at DEK to talk to and purchase. I will use it on corners , edges and critical parts only . This is a simple matter of user feedback when the past roll is getting too small.
Electronics Forum | Wed May 31 07:59:47 EDT 2017 | buckcho
Or if you have 2010 Dek, you can get the paste height monitoring system, which is pretty cool. I used it and for Lead free paste is great. Combined with the dispensing system I made my operators very lazy :)
.gif)