Electronics Forum | Fri Feb 09 14:49:04 EST 2024 | erikfriesen
Its looking like this was a CPU speed issue. The BIOS defaults to X3, and it needs X7.5 for the PCA-6180E CPU card.
Electronics Forum | Sat Nov 17 11:36:16 EST 2007 | etienne
On a Dek Horizon 03 the tact time for one panel measuring 400mm print stroke took me 16 seconds at a speed of 55mm/sec. I see no reason for reducing further tact time since loading and unloading PCBs from Pick & Place machines is relatively close.
Electronics Forum | Sat Aug 24 08:01:28 EDT 2002 | kumarraju
Hi CS Tan, Most customers expecially tend to neglet maintenance of the machine. As in the case of Dek 288 most of the end users have the impression that the 288 is one of the worst machines by Dek. But till today although Dek has discountinued manufa
Electronics Forum | Wed Aug 30 08:06:45 EDT 2006 | scombs
The reason I asked earlier about Gridlok is that we are using the on 2 Dek Horizon printers (since Jan 06) with edge clamps and they work well. We run them in Auto mode so they conform to the board at each print so I do not have to worry about the op
Electronics Forum | Mon Nov 25 20:57:23 EST 2002 | Kermit
Thanks to everyone who has responded so far. We are going with dedicated tooling for our phone cards but not for our system cards so that takes that out of the equation for the former, will evaluate for the system bds.. Thanks for the info.. Regard
Electronics Forum | Wed Jul 19 09:21:54 EDT 2006 | Chunks
That's like asking who's Mom is the best Mom. Your main goal in choosing a screen printer is based on several things: Size for your boards. Speed of your line. Board layout in ref to edge clearance / use of breakaways. Post inspection 2D/3D of paste
Electronics Forum | Mon Jun 01 09:03:18 EDT 2009 | sys_steven
This is a most INTERESTING thread! Every Pick and Place machine has its plus side and negative. Having worked on both sides, broker/service and production, I think I have a unique perspective on this. Over the years our market has changed to be mo
Electronics Forum | Thu Jun 01 10:31:05 EDT 2023 | spoiltforchoice
In the market for a new printer; plenty of choices but what are peoples thoughts? We're talking low volume high(ish) mix, it will get an easy life, it needs no "speed" features or other high throughput support. Experiences on ease of use, issues, une
Electronics Forum | Sat May 22 19:02:04 EDT 2004 | Grant
Hi, I had another thread on this, however it's kind of petered out, and so I thought I would start another more specific thread. We have been looking at both the Fuji CP7 and the Universal HSP4797 however really have no idea what to choose. It seem
| 1 |
