Electronics Forum | Sat Jul 20 07:40:51 EDT 2019 | kylehunter
I have a 265 horizon. I've noticed that if we wait more than a minute or so after that screen appears, it does the same thing you describe. It's like it goes to sleep and doesn't register the button. So maybe try watching the screen, and right as you
Electronics Forum | Wed Jul 17 12:00:27 EDT 2019 | weglimir
Hello, Dek printer is starting successfully until "press System switch to initialize printer" but nothing happens when I press the button. What could be the reason? I've tried another pait of monitors with different system button, and it doesn't ch
Electronics Forum | Fri Apr 29 23:52:03 EDT 2022 | Stevekilic
Hello, I have a problem with Dek horizon 03ix machine software hangs on the start screen. What could be the matter.
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Fri Sep 14 10:30:45 EDT 2012 | dekhead
I believe there was a software issue as well; Initially installed software (4.03) replacing existing 2.12. After that it got past the "Stack Overflow" and displayed the expected error for incorrect addressing on PCAD12... BTW solution to "vision boa
Electronics Forum | Mon Mar 01 22:51:05 EST 2021 | rob1
We have a DEK 265 Horizon and it exhibits a problem with conveyor belts. When I power up the DEK and try to paste boards, it fails to initialize the conveyor. I have to go into Maintenance and select cycle boards on rails. This too fails, but when I
Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
Electronics Forum | Mon Apr 18 12:06:03 EDT 2022 | dsmith
During the initialization process, the table will make small movements up and down, and occasionally go all the way up and back down again, then continue to bounce up and down maybe an inch of travel, it never completes initializing. I wasn't operati
Electronics Forum | Fri Apr 15 07:04:05 EDT 2022 | leaderway0
Is it a voltage problem?
Electronics Forum | Thu Nov 23 16:42:44 EST 2017 | emanuel
Anyone who uses a DEK Europa can share some information please? Known problems, availability of parts, overall experience or how it compares with other DEK models made between 2004 to 2008... Horizon, Galaxy, etc. We consider purchasing one to replac
