Electronics Forum | Wed Jul 17 12:00:27 EDT 2019 | weglimir
Hello, Dek printer is starting successfully until "press System switch to initialize printer" but nothing happens when I press the button. What could be the reason? I've tried another pait of monitors with different system button, and it doesn't ch
Electronics Forum | Wed Jul 24 15:29:33 EDT 2019 | weglimir
It came out that 24V relay switch in the power supply part was simply broken. When we fixed that - stop button was pressed, but we came to this conclusion eventually!
Electronics Forum | Thu Jul 18 12:45:49 EDT 2019 | dekhead
Lots of things it could be (basics first): E-Stop pressed. Connections within E-stop circuit (mostly Y4). Connection of SYSTEM switch back to Y4. E-stop relay. Do double pushbuttons toggle partial SYSTEM?
Electronics Forum | Sat Jul 20 07:40:51 EDT 2019 | kylehunter
I have a 265 horizon. I've noticed that if we wait more than a minute or so after that screen appears, it does the same thing you describe. It's like it goes to sleep and doesn't register the button. So maybe try watching the screen, and right as you
Electronics Forum | Thu Dec 19 08:26:19 EST 2013 | dekhead
Are both machines running the same type of computer (Advantech Computer w/P3 1G CPU probable)? if not possible problem with system software incompatibility. Contact me directly, I may be able to assist. www.dekhead.com
Electronics Forum | Fri Jan 05 10:58:43 EST 2018 | ilavu
John, I just found out more detail. If my board stop position in x is bigger than 109mm, I get error from park position to board stop.This problem started after power loss. The error comes up system power down and after pressing system button "RISIN
Electronics Forum | Fri Oct 26 11:29:41 EDT 2001 | kaopsahl
I have two DEK 288s set up in our shop, we used to use a Fuji GSP_III. I could not possibly say enough good things about the DEKs - they are incredible. The only real complaint I have with them is that if an error pops up that locks up the software -
Electronics Forum | Tue Jun 15 18:02:53 EDT 1999 | MMurphy
| | We have been using Alpha Tetra/DEK Vector for the last 3 years. Prior to that we were using mesh on frame. | | We do about 15 job changes a day and our main runners are loaded about 4 times per week. In the three years we have been using the sys
Electronics Forum | Fri Mar 12 13:30:06 EST 1999 | Bill Schreiber
Dear Scott, You are correct in questioning the chemistry portion of the process. However, I am couriuous as to why you selected DEK as a stencil cleaner. The most important part of any cleaning process is always the chemistry. How you deliver the c
Electronics Forum | Fri Mar 12 13:40:53 EST 1999 | Bill schreiber
In a nutshell, you should be looking for a chemistry first, then look for a machine. Hopefully, they will be from the same source. | Dear Scott, | You are correct in questioning the chemistry portion of the process. However, I am couriuous as to w
