Electronics Forum | Fri Feb 10 12:21:20 EST 2023 | youngbuck
Also, tried swapping the Servo card. X7 which is the Rising table servo motor card, swapped with X8,9,10 which are all the same and same result.
Electronics Forum | Mon Mar 26 16:52:23 EDT 2018 | jacobidiego
Hi, If I can choose more than 2 fiducials, what would be my benefit?
Electronics Forum | Mon Mar 26 18:11:03 EDT 2018 | tey422
3 Fiducials would be enough if two of the fiducials are from the opposite corner of the board. More than 3 would not add more accuracy but more confusion for setup.
Electronics Forum | Tue Aug 06 23:17:24 EDT 2019 | zeepower
The Optimized Wireless Charging Product, a new powerful wireless charger that can be hidden under your desktop and charge your mobile devices directly through your desktop. ZeePower GK35001—— Its input is 19V / 2A, supporting a space charging distan
Electronics Forum | Tue Mar 27 10:18:33 EDT 2018 | dleeper
Two Fiducials are sufficient for alignment. A third fiducial is useful to make sure the board isn't loaded backward. This assumes there's not a fourth fid on the opposite corner of the third. More than three fids just wastes time on a printer since
Electronics Forum | Thu Aug 04 15:07:30 EDT 2016 | sumote
I have seen a similar error on a Quad 4C machine. When setting up the parameters on a tray part there are several points of data you have to input. You have to teach where the center of the 1st part (and you have to know which corner your machine con
Electronics Forum | Thu Oct 05 20:48:06 EDT 2006 | darby
We run Dek ELAs and MPM UP1500, Everyone here prefers the Deks. Set up, software, maintenance, operation etc. There's not a lot in it - the guys just prefer the Deks. However we are an OEM and so get control on board design, finish, fiducials etc. So
Electronics Forum | Mon Jul 20 11:46:18 EDT 2009 | msherwood
I’m having trouble with the transfer of one board from the UIC conveyor to a DEk screen printer. They are set up for SMEMA to SMEMA but the DEK keeps asking for a aboard when it already has one. Then it will ask for one every 5-8 seconds. DO I have a
Electronics Forum | Wed Oct 08 01:43:24 EDT 2008 | pwilson1
Hi, Thanks for the replies! We currently use a mixture of DEK 265 LT`s and GSX`s. I ll be honest they are all around ten years old and i find them very reliable and easy to set up and maintain, with the only real issues we see now and again is w
Electronics Forum | Tue Aug 19 13:51:48 EDT 2008 | shanenaturalpoint
Just wanted to check and see if anyone out there has experience with 2001 era DEK 248 screen printers. Trying to set up a new (to me)machine, and I'm running into a bit of trouble. Please help!
