Electronics Forum | Mon Feb 19 19:31:24 EST 2024 | erikfriesen
Does anyone know where I can find the DB50 pinout to build an Upline SMEMA? Any chance it would be the same as the Downline? Exact machine is Horizon 02i.
Electronics Forum | Fri Feb 23 23:58:38 EST 2024 | erikfriesen
The previous owner found some doc's for me.
Electronics Forum | Wed Apr 21 14:38:30 EDT 2010 | remullis
Newer Universal Conveyors use 4 wire smema and FUJI should accomodate this protocol in its config screens. Old Universal Conveyors and some machines used SMPI (forget how many wires), You can purchase the 4 wire smema cable from UIC and conversio
Electronics Forum | Wed Aug 31 09:45:36 EDT 2016 | ttheis
I have a smema conveyor connected to the downline fmi connection on my up500 but the fmi sugnals show the coneyor ready signal going ro the upline ready input (screenshot). The downline ready output is activated qhen a board is output from the printe
Electronics Forum | Wed Sep 07 07:53:16 EDT 2016 | ttheis
Looks like I've got to reconfigure the fmi connections. Only pins 1 & 2 populated and when I jump the fownline pins the upline ready signal is activated. I'll reference the diagram and setup the connections for smema.
Electronics Forum | Wed Aug 31 17:12:23 EDT 2016 | ttheis
Yeah, it's set to use SMEMA for down line. I have the conveyor conected to downline fmi on up500 (right side of machine,) but the Upline Ready light is activated on the up500 when the conveyor is ready and not the downline like I would expect to see.
Electronics Forum | Wed Aug 30 03:58:26 EDT 2006 | Ola
Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline: Part No Description. 112045 Base Card
Electronics Forum | Wed Oct 20 01:43:34 EDT 1999 | Jorge L. Torres
We have a Yamazen PK-32E Magazine board Loader. It appears that at one time or another was connected with a Sanyo Pick & Place machine, which is a 24VDC system for SMEMA. I want to connect it to the DEK265 printer, which currently has an inspection s
Electronics Forum | Tue Nov 03 17:28:10 EST 1998 | smd
SMTnetters: My UIC conveyors aren't working with my: Omniflow 7 Reflow (Mfg 1/95) Dek 265 GS Philips CSM What can I do? Does anyone have experience with connecting UIC or other conveyors to the above equipment? On the reflow I jumped terminals 1
Electronics Forum | Tue Nov 03 22:11:38 EST 1998 | phillip hunter
| SMTnetters: | | My UIC conveyors aren't working with my: | | �Omniflow 7 Reflow (Mfg 1/95) | �Dek 265 GS | �Philips CSM | | | What can I do? Does anyone have experience with connecting UIC or other conveyors to the above equipment? On the refl
winsouce.jpg)
