Electronics Forum | Fri Oct 25 11:21:05 EDT 2002 | soupatech
This may sound like a stupid question but keep in mind I am very new at this and most of the training I have recieved has been from operation manuals and this forum (thanks to all). Our purchasing agent (new hire) is ordering a stencil for the first
Electronics Forum | Sat Feb 12 10:33:31 EST 2000 | Francois Racine
First I'm a french people so excuse my bad english writing. I have a complete smt production line. First a screen printer DEK 240, a chip shooter PANASERT MVIIV, a multifonction machine MULTITRONIKS EP6000, a reflow oven at the end of the SMT line a
Electronics Forum | Wed Sep 13 12:30:20 EDT 2006 | ianlg
Hi If you are looking for a good solid reliable printer you might like to compare the Dek 248 and 100MV's with the R29-V from Reprint in the UK. It has great software and vision system and is built on a new platform whereas the Dek 248 and 100MV/Mi
Electronics Forum | Thu Feb 15 16:58:11 EST 2007 | flipit
Phil, I used to print solder paste on 2" X 2" and 3" X 3" 96% Alumina substrates all the time. I used standard solder printers and stencils. Screens are difficult to use and don't print well. You can use a stencil on a DeHart, CW Price, or AMI Pr
Electronics Forum | Tue Sep 05 17:38:27 EDT 2006 | flipit
I have a lot of experience on 1995 vintage Dek 248 and Dek 249. The 1995 to 1997 vintage were not the best. If Dek has improved them, great! If not, then I would not buy one. Dek 265 is a great printer. Dek did not put a lot of support into Dek
Electronics Forum | Sat Nov 12 07:10:13 EST 2005 | fixtrade
we have a DEK 250 for sale excellent condition fully manual info@fixtrade.nl
Electronics Forum | Tue Jun 03 20:09:31 EDT 2008 | fastek
Look in your manual. There are also calibration stencils and boards necessary to calibrate DEK printers. Do you have them? If not I might have a set I would sell.
Electronics Forum | Thu Mar 30 10:54:48 EDT 2017 | emeto
If you use the calibration plate and stencil, that should fix the problem. I think that you are not saving the result from the calibration test. Double check manuals and probably with DEK technician, but it sounds like you are missing a step.
Electronics Forum | Sat Jun 23 11:41:34 EDT 2007 | grantp
Hi, We use 1:1 for 1 mm BGA and it works fine. We used it at 4 thou laser cut stencils when we had a manual stencil printer, but have moved to 5 thou with the DEK and it works ok. We originally went to 4 thou because of paste release, but the DEK
Electronics Forum | Sat Nov 06 06:41:11 EDT 2021 | ttheis
The DEK248 we had at one time was pretty compact but it did not have automated alignment- just a semi-manual camera/monitor stencil alignment process.
.gif)
