Electronics Forum | Fri Apr 24 15:21:08 EDT 1998 | Earl Moon
| Looking for anyone who has experience with high temperature soldering. Need to determine why solder joints are failing. Thermocycling of unit is -40C to +140C, 30 minute dwell time, 10 sec. transition time | Your help is appreciated | Ed Holton |
Electronics Forum | Tue Feb 14 01:00:47 EST 2017 | soldertraining
Soldering Bath - When we need to tin high-power contacts or a lot of wires, for example, in making harnesses, a regular soldering iron is either impossible to use due to the high thermal capacitance requirement, or takes way too long to perform the t
Electronics Forum | Thu Sep 07 11:39:39 EDT 2017 | swag
Two magic bullets help us greatly with fine pitch printing: 1) nano coatings (we use a DEK product) YES it really does work 2) temperature control in the printer (AC unit). Of course good quality stencil and proper cleaning of the stencil are im
Electronics Forum | Thu Sep 25 09:56:23 EDT 2008 | mysmt
Hello, we are using DEK265gsx printers, at the minute ARCOM unit is not communicating with motor control cards 0,1,2,3 in Y1 enclosure. Checked CPU & RS232/485 cards from other DEK265, found okay. Any help will be appreciated. Mysmt
Electronics Forum | Mon May 02 12:03:17 EDT 2016 | dekhead
Many different units used over the years; AC (just cooling); TCU (heating and cooling) and ECU (temperature and humidity)... Let me know exactly what you've got, I'll see what I can offer for manual. www.dekhead.com
Electronics Forum | Tue Feb 22 08:40:12 EST 2005 | JB
A couple of features on your stencil printer that should help with a couple of potential printing processes: A temperature control unit and the automatic understencil cleaning with the chemical of your choice. That alone, will reduce the chances of
Electronics Forum | Fri Feb 14 02:48:55 EST 2003 | erhard
Can anyone give me informations how tell the different ProFlow systems from each other? There are casetty systems, refillable systems, refillable systems with temperature control, casette systems with software controlled pressure regulation and refil
Electronics Forum | Wed Dec 09 22:40:48 EST 1998 | phillip fhunter
| Hi, I know for sure that by controlling temp. and humidity | conditions in SMT assy lines room, one gets advantage in | screen printing, adhesive dispensing, and pick&place | machines mainteinance. Does any one have any advice on why | else is a c
Electronics Forum | Mon Sep 30 09:47:37 EDT 2002 | Zoran
Hi, I was wondering whether anyone could explain to me, point me in the right direction or send me a schematic on how to build Current Amplifiers. I am building a automated temperature controlled cooling unit and I need to build a current amplifier
Electronics Forum | Sat Mar 30 03:34:44 EDT 2019 | jacoblemaster
Are you still facing this issue? Well, I am so late to get to know this. I think you first check your evaporator coil if your air conditioner is still freezing up. It has been seen that a dirty airflow coil stops the proper flow of air through it. It
.gif)
