Electronics Forum | Mon Dec 08 13:59:54 EST 2008 | floydf
Would anyone know the differences between a DEK 265 LT, DEK 265 GSX and a DEK 248? Thanks.
Electronics Forum | Tue Dec 09 08:51:56 EST 2008 | pjc
256 LT or Lite, low end fully auto machine, lower res alignment camera, not as accurate and repeatable as GSX. Wiper and Auto Paste dispensing optional. GSX is fully loaded with hi end camera alignment, auto paste, vac stencil wiper, may have auto fl
Electronics Forum | Thu Dec 11 20:25:12 EST 2008 | dekhead
Sort of accurate on the LT... It started off that way (earlieast machines had shuttered camera like a GS), but quickly became the same machine as a GSX. Had same cameras (black, them silver, then green) same screen cleaner options, same tooling optio
Electronics Forum | Thu May 31 23:29:57 EDT 2018 | judy49
Hi dear We are the manufacture for the smt stencil roll wiper for the DEK .EKRA MPM ect printer machine .any size can be customized . Hope we can have a chance to support u .
Electronics Forum | Thu Sep 18 07:26:57 EDT 2014 | mpolak
Hello, Have you tried using pads and apertures as fiducials using video model? Regards Marcin
Electronics Forum | Wed Mar 27 02:36:27 EDT 2024 | dekhead
DEK 265LT was not mfg until 1995/6, verify model; what camera (4 possibilities on LT) is on machine? Have you verified / replaced video cable from camera all the way back to cognex?
Electronics Forum | Tue Jan 30 14:18:22 EST 2024 | spoiltforchoice
It might be worth mentioning that Speedprint (now Europlacer) printers also have a calibrate using your own board capability. They arguably also target higher mix environments given that is the market the pick and place machine targets. DEK uses a v
Electronics Forum | Mon Mar 24 15:54:36 EDT 2008 | Paul M.
What r u using for fiducials ? fids? pads? thru-holes? video model? What r u using to print the paste? squeege blades? proflow? paste puck? Why r u using Step Mode ?
Electronics Forum | Mon Feb 17 02:51:21 EST 2003 | Scott B
We have also had this problem. I have managed to get around this by selecting a teach video model and positioning the teach window to include half the pad on the left and half the pad on the right so that the center point is bang in the middle of the
Electronics Forum | Wed Jan 10 14:15:48 EST 2001 | Claude_Couture
We have an old Conceptronic oven (Discovery Mark IV) which we use in the glue process. The video monitor just died. This is a 11 year old oven with a Goldstar model 1420 PLUS monitor. There are no specs in the manual and Conceptronic is not much help
