Electronics Forum | Tue May 03 16:36:09 EDT 2022 | dwl
I don't know anything about DEKs so while you wait for a more informed response, here are a few brain droppings... Did something get knocked loose on the camera assembly? give everything a wiggle test and make sure it stays in place. Is the encoder
Electronics Forum | Fri May 26 02:22:18 EDT 2000 | Sal
Generally a good and safe option when selecting a printer, A rhobust machine with good process capabilities. We print anything from 0402's to CCGA's using proflow, as well as print adhesive with no problems. The 265 ranges from the MK1 TO Infinity mo
Electronics Forum | Tue May 27 15:11:13 EDT 2014 | dekhead
1. Rising Table Position error is, most commonly an issue of motor movement or sensor(s); Not receiving an expected input (sensor input / 'DONE' signal) in expected period of time. Try homing table in Diagnostics see if it moves and what movements ar
Electronics Forum | Fri Feb 02 12:57:41 EST 2024 | spoiltforchoice
Arguably there is essentially one model the SP700 or 710. If you don't need 29" there is also the discontinued 210. However I don't think the brand matters all that much. You want what you can find at the right price and you need the options o
Electronics Forum | Fri May 14 18:29:26 EDT 1999 | Earl Moon
| Hi Guys, | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | So, any of you folks who have already experi
Electronics Forum | Tue May 18 03:17:50 EDT 1999 | Philip B
| | Hi Guys, | | | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | | | So, any of you folks who have alre
Electronics Forum | Thu Jun 11 07:28:12 EDT 1998 | smd
Before risking screwing up the alignment of the frame, and upon the advice of several SMTNET users, I decided to see if I could get away W. just changing the screws. I found screws with 2x the pull strength as Alpha's. But they didn't fit!! The Alph
Electronics Forum | Tue Aug 30 11:13:23 EDT 2011 | markaustin
Hello Bill A colleague here at ACW just told me about your question and as we have a few of these machines I feel that I'm in a position to answer you. Prior to 2007 we only used DEK265 (GS & GSX) machines and these we getting a bit old and passed
Electronics Forum | Sat Aug 24 08:01:28 EDT 2002 | kumarraju
Hi CS Tan, Most customers expecially tend to neglet maintenance of the machine. As in the case of Dek 288 most of the end users have the impression that the 288 is one of the worst machines by Dek. But till today although Dek has discountinued manufa
Electronics Forum | Thu Oct 05 16:45:19 EDT 2006 | realchunks
Wow, I'd have to say the exact opposite. Compared to MPM the DEKs were WAY longer to program. But find out for yourself CN. Program each and get back to us. Don't forget to program in 2D as well. That will be the kicker! As for spending money,
winsouce.jpg)
.png)
