Electronics Forum | Wed Aug 10 12:22:09 EDT 2005 | jh0n!
Configuration>Parameters>Board Handling "Board stop mounted" was incorrectly checked. Mods, feel free to delete.
Electronics Forum | Thu Nov 05 20:53:37 EST 2015 | shuttlestar
It's a strange task . if your PCB is very very small ,using topside heat is not a big problem . but for a whole PCB board . if delete the step of preheat, it will broke the whole PCB . BTW,do you finish your task ?
Electronics Forum | Fri Sep 27 21:01:52 EDT 2013 | marcelorotofrance
Hi everybody This week I was creating a new program by means of saving a successfull existing one under a new name with "UTILITIES/Data Base Utilities/Select/Copy/Delete Board Program" on CC7.54, to seize useful parts without having to teach them aga
Electronics Forum | Tue Feb 04 03:22:15 EST 2020 | tamasmagyar
You can do some changes on the fly on the machine, but is very limited. Like deleting a board from the panel, modifying offset, modifying fiducials etc. The thing is, I have issues with the programming interface, because the crashes and errors I get
Electronics Forum | Thu Aug 30 04:40:38 EDT 2012 | menatech
could be a hardware problem (processor board, harddrive) but this overflow message is most times software related. delete the calib file for an other trial. have you the machine software for reinstall?
Electronics Forum | Thu Jun 22 03:27:08 EDT 2006 | dman97
Hi everyone, I was wondering if anyone knew of a backdoor setting in these machines that will allow you to change the machine configuration. At my company, we have one operator who decided it would be nice to lock everyone out of the user menus. He
Electronics Forum | Tue Apr 09 08:56:18 EDT 2013 | leemeyer
I made a new program today that will run on 2 machines and my AP did not create the 2 additional boards that you are speaking of. I'm not sure what thats all about. This is my method: 1. Set up a Assembler/system in AP that includes both machines tha
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Wed May 31 07:16:06 EDT 2017 | stephendo
Don't rule out the possibility that the board shop depanelized it and it was assembled after depanelization. Been there, dealt with it, expletives deleted.
Electronics Forum | Thu May 31 10:21:16 EDT 2001 | davef
On "Flip Chip/uBGA Under-fill Visual Standards" � The third "Satisfactory" [The under-fill if by design should be visible � ], here the notation "if by design" is unclear. Does "according to product documentation" get to the point? The first "Acc
.gif)
winsouce.jpg)