Electronics Forum | Tue Oct 05 18:07:53 EDT 1999 | Bill Haynes
I hope that someone can help me with my problem! I am experiencing a lot of glued on parts falling off in the wave solder machine. A little information about my process: 1)We use Loctite 3609 glue that is used up long before its shelf life 2)Our pa
Electronics Forum | Mon Oct 19 05:16:56 EDT 2015 | florintoma
Hello all, I have a problem with the wave 6622c . The temperature of solder pot and preaheating zones 1 and 2 is not increasing. the strange thing is that the machine is not display no error. Can you help me with some advices?? regards
Electronics Forum | Tue Oct 20 10:14:59 EDT 2015 | aemery
Florin, Not sure if this will be helpful or not, but I have completed a couple of pot height retrofits for these waves and I seemed to remember that one of my clients spilled some solder and shorted out the 24vdc power supply. I am pretty sure this
Electronics Forum | Mon Jul 10 09:25:47 EDT 2006 | nodlac
Here is a nugget from the Data Sheet... Wave Soldering: Excess moisture on the PCB during soldering may lead to random solder balling and poor wetting of some solder joints. IT IS IMPORTANT that the flux solvent carrier (water) is fully evaporated a
Electronics Forum | Tue Nov 29 08:50:39 EST 2005 | pjc
Band width relates to conveyor speed to achive a 2 second contact time for Sn/Pb wave soldering. A typical conveyor speed is 150cm/min with a band width (contact band width between PCB and solder) of 5cm. Now for Pb-Free wave soldering a longer conta
Electronics Forum | Tue Jun 20 22:52:46 EDT 2000 | gary
How to calculate the delta T ? What's the allowable range for delta T value? we r not calculating this in our process, instead we r maintaining the pre-heat temp which we measure from topside of the bd. Thanks in advance
Electronics Forum | Mon Mar 20 13:56:04 EDT 2017 | pjc
Kleenox is designed for cleaning and protecting the solder bath in wave solder pots from air oxidation and formation. Kleenox is formulated to remove oxides. Kleenox can be used with tin/lead and lead-free solder. http://www.americancleanstat.com/k
Electronics Forum | Sat Nov 26 05:55:04 EST 2005 | milroyperera
Hi, Does any body have the experience with wave soldering a "Gold" plated PCB with SMD assembled on it? I`m experiencing massive bridging,icicles,Shadowing & Skipping. The present soldering angle is 6 deg:,pre heating rate is 2 deg/sec , Dwell time
Electronics Forum | Thu Jul 15 22:19:04 EDT 2004 | KEN
Yep, but its hard to contol small parts with the bags. They're good for DIP's and sockets, connectors, but radials are kinda hit and miss. I bought mine from Pentagon EMS. They only use the finest european leather (kidding). PENTAGON EMS 10950 SW
Electronics Forum | Thu Jun 25 09:52:06 EDT 2015 | byviko
Hello, we will buy new wave soldering machine . Trying to decide between two model; Soltec Delta-x and ERSA Powerflow N2. Could you help us , which one is better? most of pcb low volume, others high volume. At first low batch production will be done